We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Y-splitter cable with two 4-pin PWM fan connectors and one motherboard header, 10 inches long

Vszerda

Vszerda 10 inch Black Sleeved 4pin PWM 2-Fan Power Y Splitter Cable internal power cable

SKU CH-2X7T-Y0XJR

Connects two PWM fans to one motherboard header for synchronised speed control

  • Connects two fans to one motherboard header
  • PWM speed control synchronises both fans together
  • Master plug reports RPM to motherboard
  • Slave plug omits RPM pin for tandem operation
  • 10 inch sleeved cable fits standard cases

Cable purpose and audience

This 10 inch Y splitter connects two case fans to one motherboard 4-pin header. It suits builders adding a second fan without using another header. The cable carries a single PWM signal so both fans run at identical speeds.

Compatibility check

Verify that your motherboard header supplies a PWM signal; not all 4-pin headers enable modulation by default. Three-pin fans attached to this cable will run at full speed with no speed control. Only the fan on the 4-pin leg reports RPM to the motherboard.

Sustained-load behaviour

Under continuous operation the splitter simply passes the motherboard's PWM duty cycle to both fans. Fan speeds stay locked together and follow the same curve set in software such as AI Suite or similar utilities. No active electronics are present to alter the signal over time.

Highlights

  • Connects two fans to one motherboard header
  • PWM speed control synchronises both fans together
  • Master plug reports RPM to motherboard
  • Slave plug omits RPM pin for tandem operation
  • 10 inch sleeved cable fits standard cases

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include both fans or only the splitter itself?

The package contains the 10 inch Y-splitter cable only; two PWM fans must be purchased separately.

Which connector should I use if I want the motherboard to monitor fan speed?

Plug the fan you want monitored into the 4-pin master connector; the 3-pin slave connector omits the RPM signal wire.

Will my 3-pin fans still run at variable speed when attached to this splitter?

No — 3-pin fans connected to the slave connector run at full speed because PWM control requires a 4-pin connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.