We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 10 Gigabit Ethernet PCIe x1 network card with low profile bracket

Vszerda

Vszerda 10 Gigabit Ethernet PCIe x1 Network Card

SKU CH-8NJ7-61W90

Single-port 10 Gbps Ethernet adapter with Aquantia AQC113 chipset, PCIe x1 interface and low-profile bracket for desktop or server use

  • Speed10 gigabits_per_second
  • FeaturesDesktop
  • Package ContentsLow Profile Bracket, Manual, Driver CD
  • 10 Gbps throughput for large-file transfers
  • Aquantia AQC113 chipset for stable Windows and Linux operation
  • PCIe x1 interface fits low-profile and full-height slots
  • Supports 100 M, 1 G, 2.5 G, 5 G and 10 G link rates
  • 1Q VLAN tagging for segmented network traffic

Vszerda 10 Gigabit Ethernet Adapter

The Vszerda single-port network card adds a 10 Gbps Ethernet connection to a desktop computer through a PCIe x1 slot. It uses the Aquantia AQC113 chipset and supports speeds of 10, 5, 2.5, 1 and 0.1 Gbps. The package includes both a 12 cm and an 8 cm bracket for low-profile cases. Drivers are supplied for Windows 11, 10, 8.1 and Linux.

Practical limits of PCIe x1 at 10 Gbps

A PCIe 2.0 x1 link provides roughly 5 Gbps of usable bandwidth, so the card cannot reach its full 10 Gbps rate in that slot. PCIe 3.0 x1 lifts the ceiling to about 8 Gbps, still short of line rate. Only a PCIe 3.0 x2 or wider connection removes the bottleneck. The card negotiates down to 5 Gbps or 2.5 Gbps automatically when the link or partner cannot sustain 10 Gbps.

Check slot generation

Verify that your motherboard exposes a PCIe 3.0 x1 or better slot; a PCIe 2.0 x1 slot will cap throughput at half the rated speed. Confirm your switch or router has 10 Gbps, 5 Gbps or 2.5 Gbps ports — standard 1 Gbps ports will limit the link to 1 Gbps. Ensure the operating system is Windows 11, 10, 8.1 or a current Linux kernel for driver support.

Highlights

  • 10 Gbps throughput for large-file transfers
  • Aquantia AQC113 chipset for stable Windows and Linux operation
  • PCIe x1 interface fits low-profile and full-height slots
  • Supports 100 M, 1 G, 2.5 G, 5 G and 10 G link rates
  • 1Q VLAN tagging for segmented network traffic

Specifications

BrandIO Crest
Speed10 gigabits_per_second
FeaturesDesktop
Package ContentsLow Profile Bracket, Manual, Driver CD

Questions about this item

What speed versions does this card support?

The adapter runs at 10 Gbps and auto-negotiates down to 5 Gbps, 2.5 Gbps, 1000 Mbps, 100 Mbps and 10 Mbps.

What real-world throughput can I expect from the 10 Gbps rating?

The AQC113 chipset delivers up to 10 Gbps of raw bandwidth; actual file-transfer speeds depend on your storage, CPU and cabling but will be far above 1 Gbps.

Will the PCIe x1 slot limit the 10 Gbps speed?

The card uses a PCIe x1 interface; at PCIe 3.0 or newer the single lane provides enough bandwidth for full 10 Gbps line rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.