We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1/4 inch TRS to TS stereo audio cable with copper wire shielding

Vszerda

Vszerda 1/4 TRS to 1/4 TS Stereo Audio Cable

SKU CH-DDVH-5PTF6

Connects a 1/4 inch TRS stereo output to a 1/4 inch TS mono input using copper wire with shielding

  • TRS-to-TS design sums stereo output to a single mono signal
  • Copper conductor with shielding resists interference for clean audio
  • Quarter-inch plugs connect directly to amplifier and instrument jacks
  • Ready-to-use replacement cable for mono line-level connections

Vszerda 1/4 TRS to 1/4 TS Audio Cable

This cable connects a stereo 1/4 inch TRS output to a single-track 1/4 inch TS input. It suits audio engineers, musicians and installers who need to split a balanced or stereo line into a mono feed for a power amplifier or powered speaker. The copper conductor and shield preserve signal integrity across the run. It is not for users who require a balanced TRS-to-TRS link or a dual-mono Y-splitter.

Copper conductor with shield for low noise

The copper wire core and overall shield reduce electromagnetic interference and hum in typical studio or stage environments. Passive construction draws no power and adds no active noise floor. The assembly handles line-level signals without measurable loss over standard lengths. Builders needing active buffering or impedance matching should choose a different solution.

Highlights

  • TRS-to-TS design sums stereo output to a single mono signal
  • Copper conductor with shielding resists interference for clean audio
  • Quarter-inch plugs connect directly to amplifier and instrument jacks
  • Ready-to-use replacement cable for mono line-level connections

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 1/4 TRS plug to the 1/4 TS jack, and which step do people often get wrong?

Insert the TRS plug fully into the stereo output so both rings make contact; the common mistake is pushing it in only halfway, which shorts the ring to the sleeve and loses one channel.

What maintenance or replacement will the copper wire shield need later?

The braided copper shield resists corrosion, but if the jacket cracks or the connector housing loosens after repeated insertion cycles, replace the cable to avoid intermittent signal loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.