We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular HDMI audio extractor with optical and 3.5mm ports

VPFET 52-542 4K60Hz HDMI Audio Extractor Splitter to Optical and 3.5mm AUX Adapter

SKU CH-83N0-ARWMJ

Extracts audio from 4K 60 Hz HDMI sources to optical and 3.5 mm outputs with 18 Gbps bandwidth

  • ColorBlack
  • Cable Length0.9
  • SpecificationsVPFET
  • Connector BAuxiliary
  • Connector PlatingHdmi
  • Connector StyleHDMI
  • Extracts HDMI audio to optical and 3.5 mm outputs
  • Handles 4K 60 Hz video with HDR10 pass-through
  • Three selectable modes cover stereo, 5.1 and TV compatibility
  • Powered from any 5 V USB port with included cable
  • Compact 4.8 in unit weighs only 9 grams

4K60Hz HDMI Audio Extractor Splitter

The VPFET 52-542 extracts audio from an HDMI signal and sends it to a sound system via optical SPDIF or 3.5mm auxiliary output. It supports video pass-through up to 4K at 60Hz with HDR10 and 18Gbps bandwidth. This adapter suits setups where the source device lacks dedicated audio outputs, such as game consoles, media players or laptops.

Sustained operation with USB power

The unit draws power from a 5V USB port on a nearby device or a phone charger, so it runs continuously without a bulky mains brick. It handles 1080p at 144Hz or 120Hz and 4K at 50 or 60Hz YUV444 without signal degradation over long sessions. Audio sampling reaches 192kHz for both PCM and DTS formats through the optical connection.

Check your source and cabling first

The extractor does not support ARC or eARC and cannot accept a TV as the input source. You must set the source audio output to PCM when using the 3.5mm jack, and select 2.0CH mode for stereo or 5.1CH mode for optical surround. A certified HDMI 2.0 cable is recommended to maintain HDR10 compatibility at full bandwidth.

Highlights

  • Extracts HDMI audio to optical and 3.5 mm outputs
  • Handles 4K 60 Hz video with HDR10 pass-through
  • Three selectable modes cover stereo, 5.1 and TV compatibility
  • Powered from any 5 V USB port with included cable
  • Compact 4.8 in unit weighs only 9 grams

Specifications

BrandVPFET
Model52-542
ColorBlack
Cable Length0.9
SpecificationsVPFET
Connector BAuxiliary
Connector PlatingHdmi
Connector StyleHDMI
Dimensions4.8 in x 2.2 in x 0.8 in
Weight0.009 kilograms
Package Quantity1

Questions about this item

Does the VPFET 52-542 generate noticeable heat or noise when powered continuously from a USB port?

The extractor draws only 5 V USB power with low consumption, so it runs silently and stays cool during all-day use.

Which cables or ports must I already have to connect this audio extractor?

You need an HDMI source, an HDMI display or receiver, plus either a 3.5 mm stereo cable or a Toslink optical cable for the extracted audio.

Will the extractor pass 4K 60 Hz HDR10 video to my older 1080p monitor while sending 5.1-channel audio to my legacy AV receiver?

Yes, the HDMI loop-through supports 4K 60 Hz HDR10 and HDCP 2.2, while the optical output delivers 5.1-channel audio for the receiver.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.