We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular ASIC miner with metal casing and integrated power supply

VOVOV

VOVOV Antminer L3++ 580Mh/s handheld pcs accessory

SKU CH-S7A8-KMGDB

Scrypt ASIC miner delivering 580 Mh/s at 942 W with included 220 V Bitmain PSU

  • Scrypt mining at 580 Mh/s maximum hashrate
  • 942 W power draw for efficient operation
  • 220 V input voltage required for safe use
  • Bitmain power supply included with the miner
  • Listed by manufacturer on 14 March 2023

Mining hardware identity

The VOVOV Antminer L3++ is a Scrypt-algorithm ASIC miner rated at 580Mh/s with a 942W power draw. It ships new with an original Bitmain power supply and requires a 220V input. This unit targets operators who run dedicated Dogecoin or Litecoin mining farms and can provide the necessary electrical infrastructure.

Suitability and limits

Buyers needing a quiet, low-power device for home or office use should look elsewhere because the 942W consumption and cooling demands require industrial-grade power and ventilation. The hardware is also unsuitable for anyone without access to a stable 220V supply, as incorrect voltage will damage the miner. It does not support algorithms other than Scrypt.

Deciding specification

The single figure that determines fit is the 580Mh/s hashrate at 942W on the Scrypt algorithm. If your profitability model requires a different efficiency ratio or a higher throughput, this model will not meet the target. Confirm your electricity cost and 220V availability before purchase.

Highlights

  • Scrypt mining at 580 Mh/s maximum hashrate
  • 942 W power draw for efficient operation
  • 220 V input voltage required for safe use
  • Bitmain power supply included with the miner
  • Listed by manufacturer on 14 March 2023

Specifications

No published specifications for this item yet.

Questions about this item

What input voltage must my mains supply provide for the Antminer L3++?

The unit requires a 220V supply; connecting it to a different voltage can damage the miner.

How does the 942W power draw of the L3++ affect a circuit shared with older mining gear?

At 942W the L3++ adds a heavy continuous load, so the circuit and wiring must be rated for the combined draw of all devices running together.

How can I confirm the L3++ is delivering its rated 580Mh/s after setup?

Check the miner's status dashboard or pool-side hashrate reporting; a stable reading around 580Mh/s shows the unit is operating as specified.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.