VolenGo E1000 12mm label printer
Handheld 12 mm label printer prints laminated, heat-shrink and wire-wrap labels with QWERTY keyboard and USB-C power
- Print TechnologyBlack
- Cutter12mm Wire Cable label maker
- RFID Encoderprint_only, QWERTY Keyboard
- Ribbon CharacteristicsBlack, QWERTY Keyboard
- Media Typelabels
- Media sizes supported0.47 in x 3.5 in x 6 in
- QWERTY keyboard speeds up label creation
- USB-C power plus AAA option runs 263 ft of tape
- 12 mm laminated tape resists water oil abrasion
- batch printing 20 labels saves 22 inches of tape
- heat-shrink tubes with 2:1 ratio fit wires securely
Industrial wire label maker
The VolenGo E1000 prints 12 mm laminated labels for cable wraps, flags, breaker tags and Code 39 or Code 128 barcodes. A built-in QWERTY keyboard and dedicated shortcuts let technicians create fixed-length or general labels without a computer. The handheld unit runs on six AAA cells or the included USB-C cable for bench or field use.
12 mm tape width and heat-shrink support
The only media width accepted is 12 mm (0.47 in), supplied as laminated or 2:1 heat-shrink tubes rated 300 V, 125 °C (257 °F) VW-1. Cartridges load directly into the printer; no other widths or linerless rolls are compatible.
Sustained output on battery or USB-C
Six fresh AAA cells deliver up to 263 ft (80 m) of printed tape before replacement, while USB-C power removes that limit for continuous shifts. The automatic cutter trims each label cleanly, and batch printing of 20 labels at once reduces waste by 42 mm per label during long labelling sessions.
Highlights
- QWERTY keyboard speeds up label creation
- USB-C power plus AAA option runs 263 ft of tape
- 12 mm laminated tape resists water oil abrasion
- batch printing 20 labels saves 22 inches of tape
- heat-shrink tubes with 2:1 ratio fit wires securely
Specifications
| Brand | VolenGo |
|---|---|
| Series | VolenGo, 1 |
| Model | E1000 PRON-OG-DW(1) |
| Part Number | E1000 PRON-OG-DW(1) |
| Print Technology | Black |
| Cutter | 12mm Wire Cable label maker |
| RFID Encoder | print_only, QWERTY Keyboard |
| Ribbon Characteristics | Black, QWERTY Keyboard |
| Media Type | labels |
| Media sizes supported | 0.47 in x 3.5 in x 6 in |
| Total Media Capacity | 1 x E1000 label maker machine, 1 x Replacement cutling holder, 1 x USB Type-C cable, 1 x Laminated white tape 12mm(1/2in)x 4m, 1 x Instruction manual |
| Print Size | 3.5 mm x 6 mm x 9 mm |
| Interface | USB |
| Dimensions | 2.4 in x 3.96 in x 1.3 in |
| Package Contents | 1 x E1000 label maker machine, 1 x Replacement cutling holder, 1 x USB Type-C cable, 1 x Laminated white tape 12mm(1/2in)x 4m, 1 x Instruction manual |
Questions about this item
How many labels can I print on one set of batteries?
The E1000 prints up to 263 ft of 12mm tape using six AAA dry cells.
What does the USB Type-C port actually do on this label maker?
The USB Type-C interface powers the E1000 when AAA cells are not installed and supplies data for printing from a connected device.
What is the largest tape cartridge that fits inside the E1000?
The machine accepts 12 mm wide laminated or heat-shrink cartridges up to 8 m long.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible
$86.99
0.00100449BTC
In stock
