We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact digital angle finder with magnetic base, V-groove edges and backlit display

VOLCANOES CLUB Digital Angle Finder Protractor Inclinometer

SKU CH-HQKD-0136D

Measures angles with ±0.1° accuracy at 0° and 90° and ±0.2° elsewhere, plus magnetic base and V-groove for pipes

  • Accuracy ±0.1° at 0° and 90°, ±0.2° elsewhere
  • Backlit display with 0.05° resolution and auto-reversing screen
  • Absolute and relative modes plus four units: degrees, %, mm/m, IN/FT
  • Strong magnetic base and V-groove edges for pipes and saw blades
  • Hold button, audible level alarm and auto shutdown after three minutes

Digital angle finder for tradespeople

The VOLCANOES CLUB inclinometer measures absolute and relative angles in degrees, percent, millimetres per metre and inches per foot. A backlit LED screen with .05 resolution and auto-reversible display stays readable in low light or when the tool is upside down. A hold button freezes readings while an audible buzzer sounds near level or plumb.

Accuracy envelope ±0.1° at 0° and 90°

At the critical level and square positions the gauge holds ±0.1° tolerance; at all other angles tolerance widens to ±0.2°. Two measurement modes let you reference a surface or compare two planes, but the device has no data output for logging or remote display. Builders needing documented traceability or continuous recording will need a different instrument.

Magnetic base and V-groove for hands-free use

Strong built-in magnets clamp the tool to ferrous blades, pipes or structural steel while the V-groove seats securely on curved surfaces such as tubes. The compact body fits inside a tool pouch, yet the auto-shutdown after three minutes of inactivity preserves the user-supplied power source. No carrying case is included.

Highlights

  • Accuracy ±0.1° at 0° and 90°, ±0.2° elsewhere
  • Backlit display with 0.05° resolution and auto-reversing screen
  • Absolute and relative modes plus four units: degrees, %, mm/m, IN/FT
  • Strong magnetic base and V-groove edges for pipes and saw blades
  • Hold button, audible level alarm and auto shutdown after three minutes

Specifications

No published specifications for this item yet.

Questions about this item

Will the magnetic base hold the gauge firmly on my steel saw blade while I adjust the angle?

Yes, the strong built-in magnet secures it to ferrous surfaces such as saw blades, and the V-groove edges keep it stable on curved stock.

How can I confirm the gauge reads correctly once I turn it on?

Place it on a known level surface; the display should show 0.0° with the backlight on, and the audible buzzer sounds when the reading is within ±1° of horizontal or vertical.

Does the package include a battery or carrying case, or must I buy them separately?

No battery is required and no carrying bag is included, so the gauge is ready to use straight from the box.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.