Vockjour 3ft 18AWG 3-Prong Power Cord NEMA 5-15P to C13 10A 125V ETL
Three-foot 18AWG cord with NEMA 5-15P to C13 connectors, rated 10A at 125V and ETL listed for safe power delivery to computers and monitors
- Length3 Feet
- Connector DetailMale-to-Female
- SpecificationsVoltage: 125 volts_of_alternating_current; Current: 10 amps;
- Short 0.93 m reach keeps desk tidy
- 18 AWG pure copper delivers 10 A reliably
- ETL listed safety for peace of mind
- NEMA 5-15P to C13 fits most gear
- Flexible PVC jacket resists daily wear
3 ft NEMA 5-15P to C13 Power Cord
This three-foot cord carries a NEMA 5-15P plug to a C13 connector for standard AC mains equipment. It is rated 10 A at 125 V and uses 18 AWG conductors with an ETL safety listing. The SVT PVC jacket provides flexibility for desktop routing. It arrives new and ready for immediate plug-and-play use.
Suits devices with a C13 inlet
The cord fits computers, monitors, printers and similar hardware that accept a C13 connector and draw no more than 10 A. It will not work with two-prong C7 inlets or NEMA 1-15P outlets. Buyers needing a longer reach should select a different length from the same series. Equipment requiring a higher current rating or a different connector type must use another cable.
10 A 125 V current and voltage rating
The 10 A, 125 V rating determines the maximum safe load for this cable. Exceeding this limit risks overheating and voids the ETL compliance. Verify that the connected device operates within these parameters before installation.
Highlights
- Short 0.93 m reach keeps desk tidy
- 18 AWG pure copper delivers 10 A reliably
- ETL listed safety for peace of mind
- NEMA 5-15P to C13 fits most gear
- Flexible PVC jacket resists daily wear
Specifications
| Brand | Vockjour |
|---|---|
| Length | 3 Feet |
| Connector Detail | Male-to-Female |
| Specifications | Voltage: 125 volts_of_alternating_current; Current: 10 amps; Connector: Male-to-Female |
Questions about this item
How do I confirm the cord is delivering 10 A at 125 V after plugging it in?
The plug fits a standard NEMA 5-15R outlet and the C13 end seats fully in the device inlet; with the equipment powered on and running normally the cord is operating within its 1250 W rating.
What comes in the box and do I need any extra parts?
Only the 3 ft 18 AWG cord with NEMA 5-15P male and C13 female connectors is supplied; no additional cables or adapters are required for a device that accepts a C13 plug.
Which length and connector version should I choose for a monitor with a C13 inlet?
Select the 3 ft NEMA 5-15P to C13 option rated 10 A 125 V if the outlet is close; longer 5 ft 6 ft 9 ft or 10 ft versions with the same connectors are also available for greater reach.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



