We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VIVOTEK Inc.

VIVOTEK Inc. AW-GEL-205A-260 16-Port Gigabit PoE++ Managed Network Switch

SKU CH-Z2BF-KKGKC MPN AW-GEL-205A-260

A 16-port Gigabit managed PoE++ switch with four 90W ports, twelve 30W ports, two RJ45 and two SFP uplinks, and a 260W power budget

  • Switch TypeLite Managed PoE Switch
  • FormatRackmount
  • Standards802.3 af/at/bt
  • Network Management TypeManaged
  • Uplink Ports2 x RJ45 + 2 x SFP
  • Uplink InterfaceSFP & RJ45

Model AW-GEL-205A-260

  • Power 90 W devices on four ports with PoE++ 90W support
  • Connect 12 additional cameras or APs using 30 W PoE+ ports
  • Uplink via two copper and two fibre ports for flexible backbone links
  • Manage traffic with 4096 VLANs and port mirroring on a Layer 2 switch
  • Operate in harsh sites from -10 °C to 50 °C with 260 W total PoE budget

16-Port Gigabit PoE++ Managed Switch

The VIVOTEK AW-GEL-205A-260 is a rackmount Lite Managed switch with sixteen Gigabit Ethernet PoE ports. Ports 1 to 4 deliver up to 90W each under the 802.3bt standard, while ports 5 to 16 provide 30W each under 802.3at. A total PoE budget of 260W powers connected devices such as cameras or access points. Two RJ45 and two SFP uplink ports operate at 10/100/1000 Mbps.

Installers needing high-power PoE on select ports

This switch suits deployments where a few devices require up to 90W and the majority need standard PoE+ power. The 260W budget limits how many high-power ports can run simultaneously, so sites needing full 90W on every port should look elsewhere. Builders requiring Layer 3 routing or PoE budgets above 260W must choose a different model.

260W total PoE power budget

The 260W ceiling is the single figure that determines whether this unit fits the installation. Four ports at 90W would exceed the budget, so the number of high-power devices must be calculated against the cap. Port mirroring, 4096 VLAN IDs, 9216-byte jumbo frames and an 8K MAC table support managed network segmentation.

Highlights

  • Power 90 W devices on four ports with PoE++ 90W support
  • Connect 12 additional cameras or APs using 30 W PoE+ ports
  • Uplink via two copper and two fibre ports for flexible backbone links
  • Manage traffic with 4096 VLANs and port mirroring on a Layer 2 switch
  • Operate in harsh sites from -10 °C to 50 °C with 260 W total PoE budget

Specifications

BrandVivotek
ModelAW-GEL-205A-260
Switch TypeLite Managed PoE Switch
FormatRackmount
Standards802.3 af/at/bt
Network Management TypeManaged
Uplink Ports2 x RJ45 + 2 x SFP
Uplink InterfaceSFP & RJ45
Uplink Speed10/100/1000 Mbps
Primary Ports16 x GbE PoE
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
VLAN Support4096 VLAN IDs
Jumbo Frames9216 bytes
Buffer Memory4.1Mb
PoEPort 1-4 bt 90W
Port 5-16 at 30W
Layer2
Port MirroringYes
PoE Ports16
PoE Power Budget260W
Power100~240VAC, 50/60Hz
Max Power Consumption270W
Dimensions1.73" x 17.32" x 8.27"
Weight5.89 lbs.
CertificationCE, FCC, UKCA, LVD, VCCI, BSMI
TemperatureOperating Temperature: -10°C ~ 50°C (14°F ~ 122°F)
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity10 ~ 90% RH
Package ContentsPower Cord, QIG, Rack Mount Kit
Shipping weight3.00 kg
Package size500 × 260 × 100 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 16 PoE ports power my existing 802.3af cameras and 802.3at access points without configuration?

Ports 1 to 4 deliver up to 90W under 802.3bt and ports 5 to 16 supply up to 30W under 802.3at; both ranges are backward-compatible with 802.3af devices, so legacy cameras and access points will negotiate power automatically.

How can I verify the 260W PoE budget is not being exceeded once the switch is live?

The managed interface reports real-time per-port consumption and total draw; if the sum approaches 260W the switch will log an event and can disable the lowest-priority ports to stay within budget.

Does the package include SFP transceivers for the two uplink slots or must they be purchased separately?

The box contains a power cord, quick installation guide and rack-mount kit only; SFP modules for the two Gigabit SFP uplinks are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.