We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black triple monitor wall mount with three pneumatic aluminum arms on a rectangular wall plate, folded flat against the wall

VIVO

VIVO Pneumatic Triple Ultrawide Wall Mount 49/38/38 35.2 lbs

SKU CH-4VMM-69D2H

Mounts one 49" and two 38" ultrawide screens to wood studs or concrete walls with pneumatic height adjustment and full articulation

  • Supports one 49 ultrawide plus two 38 ultrawide screens
  • Each arm holds 5.5 to 35.2 lbs with high-capacity tilt joints
  • Pneumatic arms counterbalance weight for smooth one-hand height adjustment
  • Tilt 55 up to 25 down, swivel 180, rotate 360 for glare-free viewing
  • Mounts to wood studs or concrete brick with 3.4 x 7 wall plate

Triple Ultrawide Wall Mount

This VIVO pneumatic wall mount installs to wood studs or concrete brick walls and holds three ultrawide screens at once. One centre display up to 49 inches and two side displays up to 38 inches are supported on VESA 75x75mm or 100x100mm patterns. Each arm carries from 5.5 lbs to 35.2 lbs without sagging.

Pneumatic Height Adjustment

Powerful tension arms counterbalance monitor weight so height changes happen with a light touch. The system covers a pole height of 29.5 inches and lets the centre screen reach a maximum height of 43.5 inches. Arms extend up to 19.7 inches and span 39.4 inches total for flexible positioning.

Articulation Range And Build

Cast aluminium arms provide strength and scratch resistance while high-capacity tilt joints prevent droop under heavy panels. Each screen moves through +55 to -25 degrees tilt, 180 degrees swivel and 360 degrees rotation. Integrated cable covers route power and AV cords neatly during all adjustments.

Highlights

  • Supports one 49 ultrawide plus two 38 ultrawide screens
  • Each arm holds 5.5 to 35.2 lbs with high-capacity tilt joints
  • Pneumatic arms counterbalance weight for smooth one-hand height adjustment
  • Tilt 55 up to 25 down, swivel 180, rotate 360 for glare-free viewing
  • Mounts to wood studs or concrete brick with 3.4 x 7 wall plate

Specifications

BrandVIVO

Questions about this item

What does the 35.2 lb per-arm limit mean when I hang three ultrawides on this mount?

Each arm independently supports 5.5 to 35.2 lbs, so the centre screen up to 49" and the two side screens up to 38" can all sit at their maximum rated weight without sagging.

How do the VESA 75×75 mm and 100×100 mm patterns cap what monitors I can attach?

Only screens with those two hole spacings will bolt on; the high-capacity tilt joints then handle +55° to −25° tilt, 180° swivel and 360° rotation for each display.

What wall structure and clearance do I need to install the 29.5" pole and 39.4" arm span?

The 3.4 × 7" base plate bolts to wood studs or concrete/brick; folded depth is 4", maximum extension reaches 19.7" and the centre screen can rise to 43.5" high.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.