We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel tilting TV wall mount with two horizontal arms and a rectangular wall plate

VIVO

VIVO Heavy Duty 32-75" Tilting TV Wall Mount

SKU CH-SM64-BWF3H

Holds 32 to 75 inch curved or flat screens up to 165 lbs with tilt from 0° to -8° and sits 1.7" from the wall

  • ColorBlack
  • Supports 32 to 75 inch screens with VESA patterns from 75x75 to 400x400mm
  • Holds up to 165 lbs with steel construction strength tested to four times capacity
  • Tilts 0 to -8 degrees for better viewing angles while sitting 1.7 inches from wall
  • Click-in spring locks with release cords allow easy mounting and unmounting
  • All hardware and step-by-step instructions included for quick installation on wood stud or brick/concrete

Heavy-duty mount for 32-75" screens

This steel wall bracket fits curved and flat TVs from 32 to 75 inches with VESA patterns ranging from 75x75 to 400x400 mm. It is strength tested to hold up to 165 lbs safely. The low-profile design positions flat screens only 1.7 inches from the wall. Installation hardware for wood studs or brick and concrete is included.

Tilt adjustment and wall clearance

The mount provides tilt adjustment from 0° to -8° for improved viewing angles without increasing the 1.7 inch wall distance. Solid steel construction and powder coating keep the unit rigid under load. No moving parts generate noise and the bracket draws no power. Wall bracket dimensions are 17.3 by 8.9 inches for secure anchoring.

Spring-lock mounting and included hardware

Click-in spring locks with release cords allow quick mounting and removal of the display. All necessary bolts, spacers and step-by-step instructions ship in the box so no extra parts are required. The VESA brackets measure 16.8 by 1.1 inches to match the supported hole patterns. Buyers needing full-motion articulation or screens larger than 75 inches should choose a different bracket.

Highlights

  • Supports 32 to 75 inch screens with VESA patterns from 75x75 to 400x400mm
  • Holds up to 165 lbs with steel construction strength tested to four times capacity
  • Tilts 0 to -8 degrees for better viewing angles while sitting 1.7 inches from wall
  • Click-in spring locks with release cords allow easy mounting and unmounting
  • All hardware and step-by-step instructions included for quick installation on wood stud or brick/concrete

Specifications

ColorBlack

Questions about this item

How do I mount this on wood studs and what step is often missed?

Drill pilot holes into the centre of two wood studs using the 17.3 x 8.9 in wall bracket as a template, then secure the supplied lag bolts; the step people skip is confirming each bolt hits the stud centre, not just the drywall.

What hardware might need tightening after the first few weeks?

The lag bolts into the studs and the VESA bracket screws can settle; re-check torque on both sets after the first week and again at one month.

At what tilt angle does the TV sit closest to the wall?

At 0° tilt the flat panel sits 1.7 in from the wall; any negative tilt up to -8° increases that gap slightly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.