We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
L-shaped corner desk, gray tabletop, black steel frame, three-part top, electric height adjustment

VIVO

VIVO Gray/Black Electric L-Shaped Corner Desk 84.6" x 63

SKU CH-F092-C6TY6

An electric L-shaped corner workstation with a 84.6 x 63 inch three-part top that adjusts from 28.5 to 46.8 inches high via a single motor with four memory presets, supports 176 lbs on a steel frame.

  • TypeDesks & Laptop Stands
  • ColorGray/Black
  • Smooth sit-stand transitions with a single motor lifting 25 mm/s
  • Spacious L-shaped surface spans 84.6" x 63" for multi-monitor setups
  • Height adjusts from 28.5" to 46.8" via push-button controller with four memory presets
  • All-steel frame and particle-board tops support up to 225 lbs (manufacturer highlight) or 176 lbs (specification)
  • Reversible return installs on left or right to fit any corner layout

Corner Workstation for Active Workdays

This electric L-shaped desk fits into a corner or divides an office, giving enough surface for multiple monitors, a laptop and paperwork. The three-part top measures 84.6 by 63 inches when assembled, with a corner depth of 33.5 inches. A single motor lifts the frame from 28.5 to 46.8 inches at a maximum speed of 25 mm/s.

Capacity and Everyday Headroom

The steel frame and particle-board tops are rated for 176 lbs of equipment, while the manufacturer highlights note a structural limit of 225 lbs for maximum stability. That headroom covers dual-monitor arms, a desktop tower and accessories without flex. Heavier multi-screen arrays or dense server gear would exceed the tested load.

Memory Controller and Assembly Kit

The push-button panel stores four height presets so the desk returns to exact sitting or standing positions with one touch. All hardware, tools and instructions ship in the box for a single-person build. The unit runs on 110-240V input, so no separate transformer is required.

Highlights

  • Smooth sit-stand transitions with a single motor lifting 25 mm/s
  • Spacious L-shaped surface spans 84.6" x 63" for multi-monitor setups
  • Height adjusts from 28.5" to 46.8" via push-button controller with four memory presets
  • All-steel frame and particle-board tops support up to 225 lbs (manufacturer highlight) or 176 lbs (specification)
  • Reversible return installs on left or right to fit any corner layout

Specifications

TypeDesks & Laptop Stands
BrandVIVO
ColorGray/Black

Questions about this item

Will the 84.6" x 63" L-shaped surface fit my existing dual-monitor arm clamped to the 0.72"-thick tabletop?

The particle-board top is 0.72" thick, so standard C-clamps rated for up to 1" will secure a monitor arm without extra shims.

How do I verify the single motor lifts the desk smoothly through the full 28.5" to 46.8" range after assembly?

Press the up/down buttons on the 4-memory controller; the legs should move at 25 mm/s with no binding and stop precisely at each saved height.

Does the box include the 110V-240V power brick and all bolts for the 2.4"-wide steel legs, or must I buy them separately?

All hardware, the control box, power cable and illustrated instructions are included; no extra parts are required for assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.