VIVO
VIVO Electric Standing Desk 83 x 30 Vintage Brown White Frame
Spacious 83 x 30 inch electric standing desk with dual motors adjusting 24.5 to 50.3 inches, three memory presets, and a 220 lb steel frame capacity
- TypeDesks & Laptop Stands
- ColorVintage Brown/White
- Sizes/Dimensions83" x 30"
- Spacious three-piece top spans 82.7 by 29.5 inches for dual monitors
- Dual electric motors adjust height from 24.5 to 50.3 inches in seconds
- All-steel frame supports 220 lbs for stable monitor and laptop setups
- Push-button controller stores three memory presets for instant height recall
- Particle-board surface resists scratches across the full 83-inch width
Complete Electric Workstation
The VIVO DESK-KIT-2W8N combines an 82.7 x 29.5 vintage brown particle-board top with a white all-steel frame. Dual motors raise or lower the surface from 24.5 to 50.3 inches at 38 mm/s. A push-button controller stores three height presets for quick changes.
Quiet Dual-Motor Operation
The frame draws 100~240 V and moves smoothly without a loud whine during normal adjustments. Steel legs and 23.5 x 2.7 x 1.3 feet keep the desk stable while supporting monitors and accessories up to 220 lbs.
Steady Performance Under Load
The 220 lb capacity remains consistent throughout the full 24.5 to 50.3 travel range. Three-stage columns prevent wobble when the top is fully extended, so a dual-monitor setup stays level during long work sessions.
Highlights
- Spacious three-piece top spans 82.7 by 29.5 inches for dual monitors
- Dual electric motors adjust height from 24.5 to 50.3 inches in seconds
- All-steel frame supports 220 lbs for stable monitor and laptop setups
- Push-button controller stores three memory presets for instant height recall
- Particle-board surface resists scratches across the full 83-inch width
Specifications
| Type | Desks & Laptop Stands |
|---|---|
| Brand | VIVO |
| Color | Vintage Brown/White |
| Sizes/Dimensions | 83" x 30" |
Questions about this item
How do I assemble the 82.7 x 29.5 particle board top to the steel frame without misaligning the pre-drilled holes?
Lay the three top sections upside down on a protected floor, align the frame brackets with the factory holes, and hand-tighten every bolt before final torque so the 83 inch surface stays flat.
What upkeep does the dual-motor lift system need after daily height changes?
Wipe the telescopic columns clean of dust, check that the controller cable stays clear of moving parts, and retighten the foot bolts if the desk develops any wobble.
At what load does the 220 lb frame capacity become the limiting factor during all-day use?
The 220 lb rating covers the combined weight of monitors, computers and accessories; staying below that limit keeps the dual motors running at their rated 38 mm/s speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



