Vivitek
Vivitek H1188 260W Projector Lamp 3000 hrs
A new OEM replacement lamp module with a 260W Osram P-VIP bulb and housing rated for 3000 hours
- TypeP-VIP
- Wattage260W
- Lamp Life3,000 hrs
- OEM replacement lamp with genuine Osram 260W bulb
- Ready-to-install module includes bulb and housing
- 3000 hours rated lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible with Vivitek H1188 projector models
Replacement Lamp for Vivitek H1188
This new projector lamp module ships as a fully assembled bulb and housing, ready for direct installation in compatible Vivitek projectors. It uses a genuine Osram P-VIP 260W bulb to restore original brightness and colour performance. The unit is built to ISO 9001 quality standards and covers the manufacturer part number 5811120259-SVV.
Rated Lamp Life of 3000 Hours
The Osram P-VIP bulb is rated for 3000 hours of operation under normal use. This figure determines how long the lamp maintains usable output before replacement is required. Buyers who need a longer service interval should verify whether their projector supports an alternative lamp module with a higher hour rating.
260W Power Draw and Thermal Profile
The lamp draws 260W during operation, which defines the heat output and cooling demand placed on the projector. Normal use generates typical high-intensity discharge temperatures, so the projector's internal fan system must be clean and functional. Buyers whose projectors show overheating warnings should service the cooling path before installing this lamp.
Highlights
- OEM replacement lamp with genuine Osram 260W bulb
- Ready-to-install module includes bulb and housing
- 3000 hours rated lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible with Vivitek H1188 projector models
Specifications
| Brand | Vivitek |
|---|---|
| Type | P-VIP |
| Wattage | 260W |
| Lamp Life | 3,000 hrs |
Questions about this item
How bright will the 260 W P-VIP bulb be once installed in my projector?
The 260 W P-VIP bulb restores the projector’s original light output, matching the factory specification for this lamp module.
Does the H1188 lamp module use a standard connector or a proprietary interface?
The module ships as a complete housing with the bulb pre-fitted, so it plugs directly into the projector’s original lamp socket without adapters.
What clearance and mounting points does the H1188 housing need to fit my Vivitek projector?
The assembled housing matches the OEM form factor for the 5811120259-SVV module, aligning with the projector’s existing screw holes and latch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



