We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vivitek 310W projector lamp module with housing

Vivitek

Vivitek 5811120589-S 310W projector lamp

SKU CH-1HM1-7AF86

A 310W replacement lamp module with housing, rated for 2,500 hours of use

  • Wattage310W
  • Lamp Life2,500 hrs
  • Ready to install with pre-assembled housing
  • 310W bulb matches original projector specifications
  • 2,500 hours rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Genuine OEM components from leading bulb makers

310W Vivitek projector lamp module

This new Vivitek 5811120589-S replacement lamp delivers 310W output and a rated 2,500 hour life. The module arrives with bulb and housing fully assembled for direct installation in compatible Vivitek projectors.

Replaces a dimming or expired original lamp

When brightness drops below usable levels or the projector signals end-of-life, this OEM-spec module restores factory illumination. The jump is worth it if the existing lamp has reached or exceeded its rated hours and image quality has degraded.

Verify the exact projector model before ordering

Confirm that your Vivitek unit lists 5811120589-S as the correct lamp code. Ensure the projector housing accepts a 310W module and that the installation environment meets the manufacturer's operating requirements.

Highlights

  • Ready to install with pre-assembled housing
  • 310W bulb matches original projector specifications
  • 2,500 hours rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Genuine OEM components from leading bulb makers

Specifications

BrandVivitek
Wattage310W
Lamp Life2,500 hrs

Questions about this item

Which projector models accept the 5811120589-S lamp module?

The 5811120589-S module is built for Vivitek projectors that specify this part number; check your projector's manual or label to confirm it lists 5811120589-S as the correct replacement.

What is the correct way to seat the lamp housing during installation?

Align the housing guide rails with the projector slots, press firmly until the latch clicks, then tighten the captive screws; the step most users miss is forgetting to reset the lamp-hour counter in the projector menu after fitting the new 310 W module.

When should I plan to replace the 310 W bulb based on its rated life?

The lamp is rated for 2,500 hours of typical use; replace it once the projector's hour counter approaches that figure or when brightness noticeably drops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.