We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
22mm stainless steel camera head on 50m fiberglass cable with 9 inch monitor in padded case

visiPower

visiPower Sewer Inspection Camera 22mm IP68 512Hz 50m Cable

SKU CH-7J6E-ASE8F

A 22mm IP68 camera head with 12 LEDs and 145° view runs on 50m fiberglass cable to a 9″ monitor with DVR recording and 512Hz locator, powered for eight hours by a 4500mAh battery

Options Cable Length 50m/164ft

  • Cable Length 50m/164ft
  • Cable Length 40m/131ft
  • Cable Length 30m/98ft
  • Cable Length 20m/65ft

Struck-through versions exist but are not stocked here.

  • 512 Hz transmitter pinpoints underground pipe damage
  • 22 mm IP68 camera head with 145° view and 12 LEDs
  • 9" sunlight-readable monitor with built-in DVR and 8 GB card
  • 50 m fiberglass push cable resists corrosion and tension
  • 4500 mAh battery powers up to 8 hours in padded case

Camera and monitor overview

The visiPower sewer inspection system pairs a 22 mm diameter camera head with a 9 inch colour TFT LCD monitor. A 512 Hz transmitter built into the probe works with any compatible receiver to locate underground pipe damage. The kit includes an 8 GB TF card for DVR recording and a padded aluminium carry case.

Compatibility and setup checks

Verify that the 50 m (164 ft) fiberglass push rod with 4.9 mm diameter can navigate the bends and diameter of the pipes you intend to inspect. Ensure the IP68-rated #304 stainless-steel camera head suits the wet or corrosive environments you will encounter. Confirm that a 512 Hz receiver is available if you need precise above-ground location of faults.

Thermals, noise and power

The sealed camera head and monitor have no moving parts, so operation is silent. A 12 V 4500 mAh lithium battery powers the system for approximately eight hours of continuous use. The IP68 rating protects the camera from water ingress during normal inspections, while the sun-visor improves screen visibility in bright outdoor conditions.

Highlights

  • 512 Hz transmitter pinpoints underground pipe damage
  • 22 mm IP68 camera head with 145° view and 12 LEDs
  • 9" sunlight-readable monitor with built-in DVR and 8 GB card
  • 50 m fiberglass push cable resists corrosion and tension
  • 4500 mAh battery powers up to 8 hours in padded case

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and what must I buy separately?

The kit includes the 22mm IP68 camera head with 12 adjustable LEDs, a 50m fiberglass push cable, a 9-inch TFT LCD monitor with sun visor, an 8GB TF card for the built-in DVR, a 12V 4500mAh Li-battery, and a padded aluminum carry case. No separate purchases are required for basic operation.

Which cable length should I choose for my inspection jobs?

This unit is supplied with a 50m (164ft) fiberglass rod cable of 4.9mm diameter. The length is fixed for this model; choose it when you need reach up to 50 metres in drain, sewer or pipe runs.

What does the 512Hz transmitter do once the camera is inside a pipe?

The 512Hz transmitter embedded in the 22mm camera head lets any compatible 512Hz receiver pinpoint the camera's underground position from above ground, so you can locate blockages or damage without digging blindly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.