We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial endoscope with 10 inch screen, 20m cable, leather sun visor, padded case

visiPower

visiPower Industrial Endoscope Camera 10" Screen 20m Cable IP68

SKU CH-61QN-GDCY8

A 10-inch TFT monitor and IP68 camera on a 20-metre cable inspect drains, walls and pipes with 145° viewing and adjustable LED light

Options Cable Length 20m/65ft

  • 10-inch TFT monitor with sun visor for clear outdoor viewing
  • 20-metre IP68 waterproof cable reaches deep into pipes
  • 4500 mAh battery gives up to 8 hours continuous use
  • 145-degree camera angle with six adjustable 1 W LEDs
  • Padded carry case stores all components for easy transport

Industrial pipe inspection system

The visiPower endoscope pairs a 10 inch TFT colour monitor with a camera-tipped probe on a 20 metre cable for viewing blocked drains, sewer lines and wall cavities. A leather sun visor shields the screen in bright outdoor conditions. The IP68 rated camera head survives full immersion during sewer and drain inspections. The kit stores in a fully padded case for transport to job sites.

Battery runtime and charging

A 4.5 Ah lithium cell delivers approximately 8 hours of continuous use on a single charge. The supplied charger accepts AC 100 to 240 V input and outputs DC 12.6 V at 1000 mA for recharging. Six 1 W white LEDs on the camera head provide adjustable illumination for dark pipe interiors. The monitor draws power from the same battery pack during operation.

Accessories that change the workflow

The detachable sun visor enables clear viewing in direct sunlight without glare. The padded carry case holds the monitor, probe, cable and charger together for rapid deployment. Selectable cable lengths of 65 ft, 98 ft or 164 ft let you match reach to the inspection depth required. The 145 degree camera viewing angle captures wide pipe cross-sections in a single frame.

Highlights

  • 10-inch TFT monitor with sun visor for clear outdoor viewing
  • 20-metre IP68 waterproof cable reaches deep into pipes
  • 4500 mAh battery gives up to 8 hours continuous use
  • 145-degree camera angle with six adjustable 1 W LEDs
  • Padded carry case stores all components for easy transport

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 10" monitor with its leather sun visor for outdoor pipe inspections?

Mount the monitor on the padded case bracket, slide the leather sun visor over the screen until it clicks, then connect the 20m fiber cable to the camera probe and monitor ports before powering on.

What maintenance will the 4.5AH battery and 6W LED camera head need after repeated drain inspections?

Recharge the 4.5AH battery via the AC100-240V charger after roughly 8 hours of continuous use; wipe the IP68 camera lens and 6 LED lights clean after each job to maintain the 145° viewing angle.

At what cable length does signal quality drop first during a long sewer run?

The system supports selectable line lengths of 65ft, 98ft, or 164ft; image clarity from the 1000 TVL camera is strongest at 65ft and may degrade at the 164ft maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.