visiPower
visiPower 7" DVR Pipe Inspection Camera 22MM IP68 512HZ Locator 50m Cable
A 22 mm IP68 camera head with 12 LEDs and 145° view records to an 8 GB card on a 7" monitor while a 512 Hz locator traces the 50 m cable
- Parts1 Year
- Labor1 Year
- Record inspections on built-in DVR with included 8GB TF card
- Locate buried pipe damage precisely using 512Hz transmitter and receiver
- View dark pipes clearly with 1000TVL camera, 12 LEDs and 145° angle
- Withstand submersion in sewers thanks to 22mm IP68 stainless steel head
- Inspect up to 50m (164ft) of pipeline on a single cable
7" DVR Pipe Inspection Camera
The visiPower system pairs a 7-inch LCD monitor with a 22mm stainless-steel camera head rated IP68. A built-in DVR records video and stills to an included 8GB TF card while a meter counter tracks cable deployment. The kit ships in a padded leather case with a sun visor for outdoor visibility.
512Hz Locator and 50m Cable Upgrade
The integrated 512Hz transmitter lets crews pinpoint buried pipe damage from above ground without excavation. A 50-metre (164ft) push cable reaches deep sewer and drain lines that shorter reels cannot. Auto self-levelling keeps the image upright as the probe negotiates bends.
Plumbers and Contractors Needing Recording
Suited for professionals who need documented inspection footage and precise underground locating in a single portable kit. Buyers who only need visual inspection without recording or locating functions should consider simpler non-DVR endoscopes. Those requiring cable runs beyond 50 metres will need a different system.
Highlights
- Record inspections on built-in DVR with included 8GB TF card
- Locate buried pipe damage precisely using 512Hz transmitter and receiver
- View dark pipes clearly with 1000TVL camera, 12 LEDs and 145° angle
- Withstand submersion in sewers thanks to 22mm IP68 stainless steel head
- Inspect up to 50m (164ft) of pipeline on a single cable
Specifications
| Parts | 1 Year |
|---|---|
| Labor | 1 Year |
Questions about this item
What diameter access hole does the 22mm camera head need?
The camera head measures 22mm, so the pipe or opening must be at least 22mm wide to pass through.
How do I get the meter counter to show the correct distance?
Reset the counter to zero before you start pushing the 50m cable into the pipe; the display then increments automatically as the cable feeds.
Which power source will need replacement first on the 512Hz locator?
The receiver uses a built-in 3.7V 3000mAh lithium battery that will require recharging after each long session and eventual cell replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



