We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

visiPower

visiPower 10.1" 2MP Inspection Camera 100m 512Hz Transmitter

SKU CH-PK9V-C5A8B

A 10.1 inch IPS monitor displays live 2MP video from a 100m fiberglass push rod with a built-in 512Hz transmitter, and records MP4 footage to an included 16GB TF card

Options 100m/328ft

  • 1" IPS monitor gives clear outdoor viewing
  • 100 m fiberglass cable resists corrosion and tension
  • 2 MP camera records MP4 video and JPG photos
  • 16 GB TF card stores footage for later review
  • 512 Hz transmitter pinpoints blockages underground

10.1" IPS Monitor & 100m Cable

The visiPower inspection camera combines a 10.1 inch colour IPS LCD monitor with a 5 mm fiberglass push cable that extends 100 metres or 328 feet. A 2 megapixel camera head captures video and still images while a built‑in 512 hertz transmitter allows a locator to pinpoint the head position from above ground. A 16 GB TF card is supplied for local storage.

Plumbers & Contractors Needing Long Reach & Locating

This unit suits drainage engineers and utility contractors who must inspect deep sewer runs and simultaneously mark defect locations for excavation. The integrated meter counter and on‑screen keyboard let operators log distance and add text notes directly onto recordings. Teams that only work on short domestic branches or who require a smaller diameter head for tight bends should consider a shorter or narrower system.

512 Hz Transmitter for Underground Locating

The single specification that decides suitability is the 512 hertz transmitter built into the camera head. It emits a traceable signal so a compatible receiver can locate blockages or survey points without digging exploratory holes. If the job never requires above‑ground position tracking, the transmitter adds cost and bulk without benefit.

Highlights

  • 1" IPS monitor gives clear outdoor viewing
  • 100 m fiberglass cable resists corrosion and tension
  • 2 MP camera records MP4 video and JPG photos
  • 16 GB TF card stores footage for later review
  • 512 Hz transmitter pinpoints blockages underground

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat or noise does the 10.1 inch IPS monitor generate during a full day of pipe inspections?

The unit is built for continuous outdoor use with a 10.1 inch color IPS LCD monitor and a 5 mm fiberglass rod cable designed to resist corrosion and cold, so it runs cool and quietly throughout long sessions.

What additional equipment is required before the 512 Hz transmitter can locate a blockage?

A compatible 512 Hz receiver or locator is needed to detect the transmitter signal; the inspection system itself includes the 100 m camera reel, 16 GB TF card, monitor, keyboard and meter counter.

Will the meter counter and keyboard overlay work with footage recorded on older DVR units?

The meter counter supports metric and imperial readouts and the keyboard lets you add text or symbols during recording, saving everything as MP4 video and JPG photos on the included 16 GB TF card.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.