Vision ZZ-081 RJ45 Ethernet Splitter 1000Mbps 1 in 2 Out Black
Splits one Ethernet line into two simultaneous 1000 Mbps connections, powered via USB, compatible with Cat5 through Cat8 cables
- Mount Size2.2 in x 2 in x 0.6 in
- ColorBlack
- Specification1000 megabytes_per_second
- Wireless Supportnot_capable_emitting_rf_energy, RJ45 1 to 2 1000Mbps
- Frequency Band Range250 MHz
- FormatRJ45 1 to 2 1000Mbps
- Connect two devices simultaneously using one Ethernet line
- Gigabit-speed data transfer up to 1000 megabytes_per_second
- Works with Cat5 through Cat8 network cables
- Gold-plated connectors resist corrosion for reliable signal
- Powered by USB cable to enable dual output
Vision ZZ-081 RJ45 Splitter Overview
The Vision ZZ-081 RJ45 Ethernet Splitter provides a single network connection for two devices simultaneously using one Ethernet line. It supports high-speed data transfer up to 1000Mbps across compatible Cat5 through Cat8 cables. The compact black unit measures 2.2 inches wide and weighs 1.7 ounces, featuring a durable metal shell for stable signal transmission. It is designed for users needing to expand network ports where cabling is limited.
Upgrading from Basic Couplers
Unlike passive couplers that cannot handle simultaneous dual-device traffic, this powered splitter uses an upgraded IC chip to manage two active connections at once. The jump is worth it when you must connect two devices such as a computer and a smart TV to a single wall port without running new cables. It requires a 5V 1A USB power supply to operate both outputs concurrently. Buyers who need a true network switch with managed traffic or Power over Ethernet support should look elsewhere.
Installation and Common Issues
Setup is plug-and-play with no drivers or software required; simply connect the input cable, attach two output cables, and plug the USB power lead into a suitable port. Gold-plated RJ45 connectors resist corrosion and ensure reliable contact. The most frequent issue is attempting to run the splitter without the mandatory USB power, which prevents both ports from functioning. Another common mistake is trying to use the device as a 2-in-1 combiner, which the design does not support.
Highlights
- Connect two devices simultaneously using one Ethernet line
- Gigabit-speed data transfer up to 1000 megabytes_per_second
- Works with Cat5 through Cat8 network cables
- Gold-plated connectors resist corrosion for reliable signal
- Powered by USB cable to enable dual output
Specifications
| Brand | Vision |
|---|---|
| Series | ZZ-081 |
| Model | ZZ-081 |
| Part Number | ZZ-081 |
| Mount Size | 2.2 in x 2 in x 0.6 in |
| Color | Black |
| Specification | 1000 megabytes_per_second |
| Wireless Support | not_capable_emitting_rf_energy, RJ45 1 to 2 1000Mbps |
| Frequency Band Range | 250 MHz |
| Format | RJ45 1 to 2 1000Mbps |
| Audio Bit Rate/Bandwidth | 1000 megabytes_per_second |
| Display | RJ45 1 to 2 1000Mbps |
| Power Consumption | 1 amps, 5 volts |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Weight | 1.7 ounces |
Questions about this item
What are the exact dimensions of the ZZ-081 splitter so I can check it fits my cable tray?
The unit measures 2.2 in x 2 in x 0.6 in and weighs 1.7 ounces, making it small enough for tight cable runs.
How do I power the splitter and what is the common mistake to avoid?
Connect the included USB power cable to any 5 V / 1 A source; the mistake is forgetting power, because both RJ45 outputs only work when the splitter is powered.
Will the gold-plated RJ45 contacts need cleaning or replacement over time?
Gold resists corrosion better than nickel, so the contacts should not require cleaning or replacement under normal indoor use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



