We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 Y-splitter cable 10 inches long with aluminum plugs and braided sleeve

Vision FID-2USB-SHORT USB 2.0 Splitter 10 in 480 Mbps

SKU CH-DZA8-7G2MF

A USB 2.0 Y-splitter turning one port into two with 480 Mbps data and 1.5 A charging in a 10-inch braided cable

  • Splitter TypeHDMI
  • ColorBlack
  • Specification10 inches, 480 megabits_per_second
  • Wireless Support1 in 2 out-10in
  • Frequency Band Range480 MHz
  • Format1 in 2 out-10in
  • Connect two USB devices from one port with 1 in 2 out Y-splitter design
  • Transfer files at up to 480 Mbps via USB 2.0 OTG interface
  • Charge connected peripherals with up to 1.5 Amps power output
  • Aluminium shell and nylon braided jacket resist daily twists and pulls
  • Plug and play operation requires no driver installation

Vision FID-2USB-SHORT USB 2.0 Splitter

This new USB 2.0 splitter turns a single USB-A port into two female ports. It supports data transfer at 480 Mbps and provides up to 1.5 Amps of power output. The 10-inch cable features an aluminum shell and nylon braided jacket for durability. Plug-and-play operation requires no driver installation.

Suits peripheral expansion, not car audio

The splitter suits users adding a keyboard, mouse, flash drive, printer, headset, or VR device to a laptop, PC, PlayStation, or Xbox. It is not for buyers who need a hub for Android Auto, Apple CarPlay, or Ford Sync systems. It cannot support two earphones simultaneously. High-power devices are not recommended for this adapter.

480 Mbps USB 2.0 data rate decides fit

The single specification that decides fit is the 480 Mbps USB 2.0 data rate. This bandwidth handles standard peripherals but limits high-speed storage or video capture. The 10-inch length suits desktop setups where devices sit close to the host port. Check that your devices operate within USB 2.0 speeds before purchase.

Highlights

  • Connect two USB devices from one port with 1 in 2 out Y-splitter design
  • Transfer files at up to 480 Mbps via USB 2.0 OTG interface
  • Charge connected peripherals with up to 1.5 Amps power output
  • Aluminium shell and nylon braided jacket resist daily twists and pulls
  • Plug and play operation requires no driver installation

Specifications

BrandVision
SeriesFID-2USB-SHORT
ModelFID-2USB-SHORT
Part NumberFID-2USB-SHORT
Splitter TypeHDMI
ColorBlack
Specification10 inches, 480 megabits_per_second
Wireless Support1 in 2 out-10in
Frequency Band Range480 MHz
Format1 in 2 out-10in
Resolution Support4K
Video Bit Rate/Bandwidth225 MHz
Audio Bit Rate/Bandwidth480 megabits_per_second
Scaling10 inches
VideoPC
AudioData Transfer, Charging
HDMI1 In
SDI2 Out
Analog AduioUSB male to USB female, Usb
Display1 in 2 out-10in
CompatibilityPC
System RequirementsPC
Power Consumption1.5 amps
Weight0.03968320716 pounds

Questions about this item

Does the Vision FID-2USB-SHORT require an available USB-A port on the host device to function?

Yes, the splitter connects via a single USB-A male plug and expands it into two USB-A female ports for peripherals.

Will the 480 Mbps data rate of this USB 2.0 splitter limit performance of a USB 3.0 flash drive I keep using?

The drive will operate at USB 2.0 speeds, capped at 480 Mbps, because the splitter uses a USB 2.0 OTG interface.

How can I confirm the splitter is delivering data and power correctly after plugging it in?

Connected devices should be recognised immediately with no driver installation, and the aluminium shell may feel slightly warm during 1.5 A charging.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.