We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-powered Ethernet splitter with two RJ45 ports and short cable

Vision Ethernet Splitter 1 to 2 1000Mbps USB Powered 39.3in

SKU CH-G7Y0-JXJSR

Splits one Ethernet line into two 1000 Mbps connections with USB power over a 39.3 in cable

  • ColorBlack
  • SpecificationRJ45, 3, Black
  • Wireless SupportRJ45
  • Format1 to 2
  • Audio Bit Rate/Bandwidthsmal
  • Scalingsmal, 3
  • Share one Ethernet line between two devices simultaneously
  • USB-powered operation requires only a 5 V 1 A port
  • 1000 Mbps maximum throughput per cable set
  • 3 in USB cable included for flexible placement
  • Gold-plated RJ45 contacts and aluminium shell for stable signal

Vision Gigabit Ethernet Splitter 1 to 2

This Vision Gigabit Ethernet Splitter divides a single RJ45 connection into two ports for simultaneous use. It is powered by an included USB cable measuring 39.3in and requires a 5V 1A supply. The unit features an aluminium alloy shell, gold-plated contacts and a thick PCB for stable signal transmission.

Suits users with limited wall ports or short

It works well for desktop setups where two devices must share one incoming Ethernet line without running new cables. Buyers who need each port to run at full gigabit speed independently should look at a powered switch instead, as this splitter shares the total bandwidth between the two outputs.

Maximum throughput is 1000Mbps shared across both

The chipset supports up to 1000Mbps per cable set with no crosstalk between the two signal paths, making it adequate for typical office traffic and media streaming. Heavy simultaneous transfers on both connected devices will saturate the link, so aggregate performance drops when both ports are active at high load.

Highlights

  • Share one Ethernet line between two devices simultaneously
  • USB-powered operation requires only a 5 V 1 A port
  • 1000 Mbps maximum throughput per cable set
  • 3 in USB cable included for flexible placement
  • Gold-plated RJ45 contacts and aluminium shell for stable signal

Specifications

BrandVision
Seriesnew ethernet splitter 1 to 2
Modelnew ethernet splitter 1 to 2
Part Numberethernet splitter 1 to 2
ColorBlack
SpecificationRJ45, 3, Black
Wireless SupportRJ45
Format1 to 2
Audio Bit Rate/Bandwidthsmal
Scalingsmal, 3
SDI3 HD/SD-SDI Input; 3 HD/SD-SDI Output
Serial InterfaceRJ45
Network InterfaceRJ45
USB Port1
Component3 Input/3 Output
Other ConnectorRJ45
Displayethernet splitter 1 to 2
CompatibilityDesktop
System RequirementsDesktop, 5 volts_of_direct_current
Power Supplyfalse
FeatureRJ45
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.05 kilograms
Package Contentethernet splitter 1 to 2, 1, installation_manual

Questions about this item

What type of USB port do I need on my computer to power the Vision Ethernet Splitter?

The splitter requires a USB port that can supply 5 volts and 1 ampere of direct current.

If I connect a Cat5e cable to the splitter, will it still operate at the 1000Mbps maximum throughput?

The splitter supports Cat5, Cat5e, Cat6, Cat7 and Cat8 cables, so a Cat5e cable will work at up to 1000Mbps.

How can I verify that both connected computers are receiving a Gigabit link after setup?

Check the network adapter status on each computer and confirm the link speed shows 1000Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.