We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of quarter-turn valves with FIP and slip connections, brass finish

Vintage

Vintage CC44156 Quarter Turn Valves 1/2 FIP X 1/2 & 7/16 OD Slip

SKU CH-XXEY-K0HHE

Quarter-turn valves connect 1/2-inch FIP to 1/2-inch and 7/16-inch slip fittings

  • TypeTools
  • Quarter-turn operation speeds shut-off tasks
  • 1/2 inch FIP inlet fits standard supply lines
  • Dual 1/2 inch and 7/16 inch OD slip outlets cover common connections
  • New Vintage construction ensures reliable performance
  • California Proposition 65 warning notes chemical hazards

Quarter Turn Valves for Bath Fixtures

These quarter turn valves from Vintage are designed for bath faucet installations. They connect a 1/2 inch FIP inlet to both a 1/2 inch and a 7/16 inch O.D. slip outlet. The product is supplied new and carries the CC44156 model reference.

Integration with Copper and FIP Supply Lines

The dual outlet configuration allows connection to two different supply tube sizes without additional adapters. A 1/2 inch FIP thread connects to the water supply, while the slip ends accept compression fittings for 1/2 inch and 7/16 inch O.D. tubing. This reduces the number of separate joints required in the rough-in.

Suitable for Standard Bath Replacements

These valves suit plumbers and homeowners replacing or installing bath faucet supply stops where both outlet sizes are needed. They are not intended for high-pressure main shut-off duties or gas service. Installers requiring a single outlet size or a different thread standard should select an alternative valve.

Highlights

  • Quarter-turn operation speeds shut-off tasks
  • 1/2 inch FIP inlet fits standard supply lines
  • Dual 1/2 inch and 7/16 inch OD slip outlets cover common connections
  • New Vintage construction ensures reliable performance
  • California Proposition 65 warning notes chemical hazards

Specifications

BrandVINTAGE
TypeTools

Questions about this item

How long before the quarter-turn mechanism starts to drip under daily use?

The valve uses a quarter-turn ceramic disc design that resists wear longer than traditional compression stems, so drips typically appear only after years of normal household cycles.

Does the brass body get hot or transmit vibration when water runs continuously?

Brass conducts heat quickly, so the valve body will reach water temperature within seconds, but it does not amplify vibration beyond normal pipe resonance.

Which supply-line fittings must already be in place for the 1/2 inch FIP and 7/16 inch slip connections?

You need a 1/2 inch female iron pipe thread on the supply stub-out and a 7/16 inch outside-diameter copper or plastic tube for the slip joint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.