We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of quarter-turn valves, brass finish, compression and FIP ends

Vintage

Vintage CC43108X Quarter Turn Valves 1/2 In FIP X 3/8 In OD Compression

SKU CH-DFX1-JMZYD

Quarter-turn shut-off valves connect 1/2 inch FIP supply lines to 3/8 inch compression outlets

  • TypeTools
  • Quarter-turn operation speeds up shut-off tasks
  • 1/2 inch FIP inlet fits standard supply lines
  • 3/8 inch OD compression outlet connects tubing directly
  • New condition ensures reliable performance out of the box
  • Vintage brand backs the CC43108X valve design

Quarter Turn Valve 1/2 Inch FIP X 3/8 Inch OD

The Vintage CC43108X quarter turn valve connects a 1/2 inch female iron pipe thread to a 3/8 inch outer diameter compression fitting. It is intended for plumbers and homeowners repairing or installing bath faucet supply lines. The valve provides simple on and off control for water flow in residential bathrooms.

California Proposition 65 Chemical Warning

This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. The warning is required under Proposition 65 regulations. No thermal, noise or power draw data applies to this mechanical plumbing component.

Compression Fitting For Supply Line Installation

The valve fits standard 1/2 inch FIP supply stub outs and accepts 3/8 inch OD compression supply tubes. It frees the installer from soldering by using a compression nut connection. Buyers needing a different thread size or a sweat connection will require a separate valve model.

Highlights

  • Quarter-turn operation speeds up shut-off tasks
  • 1/2 inch FIP inlet fits standard supply lines
  • 3/8 inch OD compression outlet connects tubing directly
  • New condition ensures reliable performance out of the box
  • Vintage brand backs the CC43108X valve design

Specifications

BrandVINTAGE
TypeTools

Questions about this item

How do I install the 1/2 inch FIP thread without overtightening?

Wrap the male pipe threads with PTFE tape, thread the valve on by hand until snug, then give one-half turn with a wrench; the quarter-turn handle should then move freely without forcing.

Which part will need replacement first on the CC43108X valve?

The internal ceramic disc cartridge is the wear item; mineral build-up or grit in the water supply will eventually make the quarter-turn action stiff or cause a slow drip.

What pressure limit appears first during continuous flow through the 3/8 inch compression outlet?

The 3/8 inch compression fitting and tubing restrict flow before the valve body reaches its own pressure rating, so sustained high demand will show a pressure drop at that connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.