We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
5.5 inch Full HD touchscreen monitor with 1200 nits brightness and HDMI 1.4

Viltrox

Viltrox DC-550 Pro 5.5" Full HD Touchscreen Monitor camcorder accessory

SKU CH-99AF-NXQ40

A 5.5 inch Full HD touchscreen monitor with 1200 nits brightness, HDMI 1.4 input and output, 3.5 mm headphone jack, waveform and histogram tools, and NP-F battery or DC power options

  • Bright 1200 nit 5.5" screen for clear outdoor viewing
  • Full HD 1920x1080 touchscreen delivers detailed monitoring
  • HDMI 1.4 in and out plus 3.5 mm audio jack for flexible connectivity
  • Built-in histograms and parade waveforms ensure accurate exposure
  • Powers via NP-F batteries or DC and USB-C inputs

Viltrox DC-550 Pro 5.5" Full HD Touchscreen

The Viltrox DC-550 Pro is a 5.5 inch Full HD touchscreen monitor designed for camcorder users who need accurate on-camera monitoring. It delivers 1920x1080 resolution with 1200 nits brightness and a 178 degree viewing angle for clear visibility in bright conditions. The unit includes professional tools such as histograms, parade waveforms and 3D LUT support via SD card.

Installation uses HDMI 1.4 and NP-F battery plates

Mount the monitor via its standard shoe or 1/4 inch thread, connect the camera through the HDMI 1.4 input and power it with an NP-F550, F570, F750, F770, F960 or F970 battery. The 3.5 mm headphone jack allows audio monitoring. A common issue is forgetting to enable the camera's clean HDMI output so the monitor receives an uncluttered signal.

Check your camera outputs HDMI 1.4 and clean video

Verify that your camera provides an HDMI 1.4 signal and can disable on-screen overlays for clean monitoring. Confirm you have a compatible NP-F series battery or a DC 12 to 18 volt 2 amp supply for power. Ensure an SD card is available if you plan to load custom 3D LUTs for log footage preview.

Highlights

  • Bright 1200 nit 5.5" screen for clear outdoor viewing
  • Full HD 1920x1080 touchscreen delivers detailed monitoring
  • HDMI 1.4 in and out plus 3.5 mm audio jack for flexible connectivity
  • Built-in histograms and parade waveforms ensure accurate exposure
  • Powers via NP-F batteries or DC and USB-C inputs

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 5.5" Full HD touchscreen is displaying a clean 1920x1080 signal after connecting my camera?

Check the on-screen histogram and parade waveform tools — they show real-time exposure and RGB/YUV data so you can verify the incoming 4K HDMI 1.4 feed is scaled correctly to the 1200-nit panel.

What power items are included with the DC-550 Pro and what must I source separately?

The box includes NP-F series batteries (F550/F570/F750/F770/F960/F970 compatible); you must provide a DC 12-18V 2A adapter or a USB-C PD charger rated at least 5V 3A for mains power.

Which NP-F battery capacity should I choose for the longest run-time on the 1200-nit display?

The F960 or F970 cells hold the most capacity in the supported range, giving the longest operating time before you need to swap or recharge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.