Viliqiou 5543QOQE0306 ATX 4-pin power splitter cord 1.8m cable black
External ATX power switch with 1.8 m cable and 1-to-2 splitter adds a desk-mounted on/off button while keeping the original case button active
- TypeATX, 4_pin_atx
- Connector Number1
- Connector Detail4_pin_atx, 1
- SpecificationsATX, 4_pin_atx, 1, 800, PC, 70 L x 1 W x 1 H inches, NO
- FeaturesATX, 4_pin_atx, 1, non_modular, PC, NO, false, 800
- DisclaimerNO
- External power button puts on/off control on your desk with 1.8 m cable
- 1-to-2 splitter keeps original case button working alongside new switch
- Compatible with standard ATX motherboard power-switch pins
- Tool-free mounting on desk, monitor stand or wall
- Durable ABS body with matte black finish and 180 cm reach
External ATX Power Switch with 1.8 m Cable
This external power button connects to standard ATX motherboard pins and extends the on/off control to the desktop with a 1.8 metre cable. It suits builders who want the case tucked under a desk or inside a rack while keeping a convenient switch at hand. The included 1-to-2 splitter keeps the original chassis button active so both switches operate simultaneously.
Tool-Free Installation with Splitter
The compact ABS switch mounts on a desk, monitor stand or wall without tools and the package includes a step-by-step guide. The splitter plugs between the motherboard header and the existing case button, so no soldering or pin rearrangement is required. A common issue is ensuring the two-pin connector aligns with the correct motherboard header pins; misalignment will prevent the system from starting.
Cable Length and Mechanical Limits
The 1.8 metre cable (approximately 70.9 inches) sets the maximum distance between the switch and the motherboard. Longer runs are not supported by this assembly and the two-pin ATX header interface carries only the momentary power signal. Builds that need a remote reset button or status LEDs require a different header connection not provided by this unit.
Highlights
- External power button puts on/off control on your desk with 1.8 m cable
- 1-to-2 splitter keeps original case button working alongside new switch
- Compatible with standard ATX motherboard power-switch pins
- Tool-free mounting on desk, monitor stand or wall
- Durable ABS body with matte black finish and 180 cm reach
Specifications
| Brand | Viliqiou |
|---|---|
| Model | 5543QOQE0306 |
| Type | ATX, 4_pin_atx |
| Connector Number | 1 |
| Connector Detail | 4_pin_atx, 1 |
| Specifications | ATX, 4_pin_atx, 1, 800, PC, 70 L x 1 W x 1 H inches, NO |
| Features | ATX, 4_pin_atx, 1, non_modular, PC, NO, false, 800 |
| Disclaimer | NO |
Questions about this item
How can I verify the external power button and splitter are working correctly after connecting them to the ATX motherboard pins?
Press the new switch; the PC should power on. The original case button must also still turn the system on and off, confirming both switches operate simultaneously through the splitter.
What components are included in the package and is any additional hardware required for installation?
The box contains the external power switch with its 1.8 m cable and a 1-to-2 ATX splitter. No extra parts or tools are needed; the switch mounts with adhesive or screws you already have.
Which cable length version should I choose for a typical under-desk tower placement?
The 1.8 metre (180 cm / 70.9 in) cable is the only length offered, providing enough reach to run from a floor-standing case up to a desk-mounted switch.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115797BTC
In stock
