We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black metal amplifier unit with front panel volume knobs and rear terminal connections

Viking

Viking PA-30 30 watt telecom paging amp

SKU CH-3NBE-J8MFE

30-watt paging amplifier drives up to 30 eight-ohm or 50 70V speakers with separate volume controls and four selectable ring tones

  • SpecificationsViking 30 Watt Telecom Paging Amp
  • Drives up to 30 speakers at 8 ohms for wide coverage
  • 70 V output supports up to 50 speakers for larger installations
  • Four selectable ring tones match different alert needs
  • Separate volume controls for paging, music, aux and ringer
  • 600 ohm output links multiple amps for expanded power

Viking PA-30 paging amplifier

The Viking PA-30 is a 30 watt telecom paging amplifier designed for office environments that need distributed audio. It serves facilities requiring loud ringing, night bell functions or background music across multiple zones. The unit suits installers who want a single device to handle paging, auxiliary input and ringing tones without a separate mixer.

Check your speaker load and wiring before ordering

Verify that your existing speakers are rated for 8 ohm or 70V operation and that the total quantity does not exceed the supported limits. Confirm you have a free trunk or paging port on the telephone system for the page input. Ensure an external music source is available if background music is required. The amplifier also needs a 600 ohm output path if you plan to cascade additional amplifiers.

Fits a rack or wall mount with basic AC power

The amplifier provides master volume plus separate controls for auxiliary, paging, ringing and background music so one installer can balance all zones at the unit. Its 70V output lets you run longer cable runs with smaller gauge wire than low impedance systems. The 600 ohm output frees you to add more amplifiers for larger installations without extra signal processing. Multiple units can be combined when a single 30 watt chassis is insufficient.

Highlights

  • Drives up to 30 speakers at 8 ohms for wide coverage
  • 70 V output supports up to 50 speakers for larger installations
  • Four selectable ring tones match different alert needs
  • Separate volume controls for paging, music, aux and ringer
  • 600 ohm output links multiple amps for expanded power

Specifications

BrandViking
ModelPA-30
SpecificationsViking 30 Watt Telecom Paging Amp

Questions about this item

Does the PA-30 include the speakers or do I need to buy them separately?

The amplifier drives up to 30 eight-ohm speakers or up to 50 70V speakers, which must be purchased separately.

Should I choose the eight-ohm or 70V output for my installation?

Use the eight-ohm output for up to 30 speakers on shorter runs; use the 70V output for up to 50 speakers on longer cable runs.

How much paging power will I actually get from the 30 watt rating?

The 30 watt amplifier powers up to 30 eight-ohm speakers or 50 70V speakers, with separate volume controls for paging, ringing, auxiliary input and background music.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.