Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081916BTC
In stock
Vigor VG263 Red High Strength Threadlocker 50ml
Red high-strength anaerobic threadlocker secures metal fasteners up to M25 with 10 Nm initial torque, cures in 10 minutes and withstands -54°C to 230°C
- FeaturesColor Glue
- High-strength formula secures fasteners up to M25 with 10 Nm average initial torque
- Medium 400600 mPa·s viscosity allows precise application and resealable bottle prevents gel solidification
- Initial cure in 10 minutes and full cure in 24 hours for rapid project completion
- Withstands -54°C to 230°C operating range resisting oil, water and solvent erosion
- Anaerobic 50 ml net content in 110 ml bottle prevents premature curing during storage
Vigor VG263 Red Threadlocker 50 ml
This anaerobic adhesive locks and seals metal fasteners up to M25 size with a high-strength bond that resists oil, water and solvents. It is intended for mechanics and engineers who need permanent retention on bolts exposed to heavy vibration or extreme chemical environments.
Temperature and cure limits
The compound operates continuously from -54 °C to 230 °C and reaches handling strength in 10 minutes, with full cure after 24 hours. Because it cures only in the absence of air, the 110 ml bottle is half-filled to deliver the stated 50 ml net volume without premature gelation.
Medium viscosity and bottle design
At 400 600 mPa·s the fluid flows evenly into threads yet stays in place during assembly, and the resealable cap prevents the remaining product from solidifying between jobs. Disassembly requires localised heat and standard hand tools, so the product suits permanent builds rather than frequently adjusted joints.
Highlights
- High-strength formula secures fasteners up to M25 with 10 Nm average initial torque
- Medium 400600 mPa·s viscosity allows precise application and resealable bottle prevents gel solidification
- Initial cure in 10 minutes and full cure in 24 hours for rapid project completion
- Withstands -54°C to 230°C operating range resisting oil, water and solvent erosion
- Anaerobic 50 ml net content in 110 ml bottle prevents premature curing during storage
Specifications
| Brand | VIKAGU |
|---|---|
| Features | Color Glue |
Questions about this item
Should I choose the 50 ml or 250 ml bottle?
The 50 ml bottle contains 50 ml net in a 110 ml container, leaving air space so the anaerobic adhesive does not cure prematurely. The 250 ml size simply offers more volume for larger or repeated jobs.
What does the 10 Nm initial torque figure mean when the threadlocker is applied?
It means a typical fastener tightened after application will resist loosening with about 10 Nm of breakaway torque once the product has started to cure, giving a measurable lock on bolts up to M25.
What temperature range does the anaerobic threadlocker withstand in service?
The cured adhesive remains effective from -54 °C up to 230 °C, so it survives extreme cold, engine heat and most industrial thermal cycles without losing its locking strength.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
