ViewSonic
ViewSonic VS15947 Projector Lamp 210W
A ready-to-install replacement lamp module with a 210W UHP bulb rated for 4000 hours normal or 5000 hours economy use
- TypeUHP
- Wattage210W
- Lamp Life4,000 Hrs. (Normal) - 5,000 Hrs. (Economy)
- Ready-to-install module with genuine Philips UHP 210W bulb
- Up to 5000 hours lamp life in economy mode
- Manufactured to ISO9001 quality standards
- Tested for beam performance and ignition reliability
- Direct OEM replacement for ViewSonic RLC-098 projectors
Replacement lamp for ViewSonic projectors
The VS15947 module supplies a new 210W UHP bulb inside a ready-to-fit housing. It matches the RLC-098 part number used in compatible ViewSonic projectors. Installation requires no extra tools or assembly steps. Buyers needing a different wattage or bulb type cannot use this unit.
Upgrade from a dim or expired original lamp
When the existing lamp reaches the end of its rated life the image loses brightness and colour accuracy. Swapping in this module restores output to factory levels. The jump is worth it once the old lamp passes 4000 hours in normal mode or 5000 hours in economy mode. Projectors that use a different lamp code or higher wattage are not supported.
Practical limits of the 210W UHP design
The lamp delivers 4000 hours in normal mode and 5000 hours in economy mode before replacement is needed again. Each unit is built to ISO 9001 quality standards and tested for ignition, voltage and run-time. The 210W power draw fixes the heat and brightness envelope, so the projector’s cooling and power supply must already match this rating.
Highlights
- Ready-to-install module with genuine Philips UHP 210W bulb
- Up to 5000 hours lamp life in economy mode
- Manufactured to ISO9001 quality standards
- Tested for beam performance and ignition reliability
- Direct OEM replacement for ViewSonic RLC-098 projectors
Specifications
| Brand | ViewSonic |
|---|---|
| Type | UHP |
| Wattage | 210W |
| Lamp Life | 4,000 Hrs. (Normal) - 5,000 Hrs. (Economy) |
Questions about this item
What projector model does the VS15947 lamp module fit?
The VS15947 lamp module is built for ViewSonic projectors that use the RLC-098 lamp assembly; it includes the 210W Philips UHP bulb pre-mounted in the housing so it matches the original form factor.
How do I install the VS15947 lamp, and what step do people often miss?
Power off and unplug the projector, let it cool completely, remove the lamp cover, unscrew the old module, insert the new VS15947 unit until it seats firmly, re-tighten the retaining screws, replace the cover, then reset the lamp timer in the projector menu — skipping the timer reset is the step most often missed.
When will the VS15947 lamp need replacement, and what should I keep on hand?
Expect roughly 4000 hours in normal mode or 5000 hours in economy mode before brightness drops to half; keep a spare VS15947 module and a soft lint-free cloth for the next swap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



