ViewSonic
ViewSonic RBB-003 180W 2000 Hrs Projector Lamp
An 180W replacement lamp module with a 2000-hour rated life and pre-assembled housing for quick installation
- TypeProjector Lamp
- Wattage180W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- 180W UHB bulb delivers specified brightness
- 2000-hour rated lamp life for extended use
- Manufactured to ISO9001 quality standards
- Genuine Philips UHB bulb inside the module
Ready-to-install lamp module
The ViewSonic RBB-003 is a complete 180W projector lamp assembly that combines a new Philips UHB bulb with its housing. It is designed for owners of compatible ViewSonic projectors who need a straightforward replacement without separate bulb handling. The unit arrives fully assembled so installation takes only a few minutes. Three OEM versions and one compatible version are offered depending on stock.
Thermals and power draw
The lamp operates at its rated 180W and is built to meet ISO 9001 quality checks for ignition, voltage stability and run-time. Normal use produces the heat and fan noise typical for a 180W UHB light source in the host projector. No additional power specifications or acoustic ratings are provided by the supplier.
Rated lamp life
The module is rated for 2,000 hours of operation before replacement is recommended. Buyers who need a longer interval between changes should verify whether their projector supports an alternative lamp with a higher hour rating.
Highlights
- Ready to install with pre-assembled bulb and housing
- 180W UHB bulb delivers specified brightness
- 2000-hour rated lamp life for extended use
- Manufactured to ISO9001 quality standards
- Genuine Philips UHB bulb inside the module
Specifications
| Brand | ViewSonic |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the ViewSonic RBB-003 lamp module and what step is often missed?
The module arrives as a fully assembled bulb and housing. Power off and unplug the projector, let it cool completely, remove the old lamp cover and module, insert the new unit until it seats firmly, replace the cover, then reset the lamp timer in the projector menu — this reset step is frequently overlooked.
What maintenance or replacement will the ViewSonic RBB-003 need later?
The lamp is rated for 2,000 hours of use. After that period the bulb will dim and eventually fail, so the entire RBB-003 module must be replaced again; no separate bulb-only change is possible because the housing and bulb are supplied as one sealed unit.
What limit appears first during sustained use of the ViewSonic RBB-003?
The 2,000-hour rated lamp life is the primary limit; continuous operation will gradually reduce brightness until the projector indicates a lamp warning or the image becomes too dim for practical viewing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



