ViewSonic
ViewSonic Pro 6200 RLC-072 UHP 180W projector lamp
Genuine compatible UHP 180 W replacement lamp module with housing, rated 5,000 hours normal or 6,000 hours economy for ViewSonic Pro 6200 projectors
- TypeUHP
- Wattage180W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Genuine compatible replacement module fits ViewSonic Pro 6200 projectors
- UHP 180W lamp delivers bright, consistent illumination
- 5000 hours normal mode extends time between changes
- 6000 hours economy mode reduces operating cost
- Fully assembled housing enables quick tool-free installation
Genuine replacement lamp for ViewSonic Pro 6200
This UHP 180 W module ships as a complete housing with the bulb already fitted, so it installs in minutes without tools. It is built for owners of the Pro 6200 who need a drop-in replacement that restores original brightness.
ISO 9001 manufacturing and pre-assembled housing
Each unit is produced to ISO 9001 quality standards and checked for beam performance, ignition voltage, connections and run-time. The pre-assembled housing removes the need to handle a bare bulb, reducing the risk of contamination or misalignment during a lamp change.
Rated 5 000 hours normal or 6 000 hours economy mode
The 180 W UHP bulb delivers up to 5 000 hours in normal operation and 6 000 hours when the projector runs in economy mode. Brightness will gradually decline as the lamp ages, and the module cannot be re-lamped once the rated hours are reached.
Highlights
- Genuine compatible replacement module fits ViewSonic Pro 6200 projectors
- UHP 180W lamp delivers bright, consistent illumination
- 5000 hours normal mode extends time between changes
- 6000 hours economy mode reduces operating cost
- Fully assembled housing enables quick tool-free installation
Specifications
| Brand | ViewSonic |
|---|---|
| Type | UHP |
| Wattage | 180W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
What wattage UHP bulb does the RLC-072 lamp module use?
The module uses a 180W UHP bulb, matching the original specification for the Pro 6200 projector.
Does the RLC-072 lamp arrive as a complete housing assembly?
Yes, the bulb is pre-installed in its housing so you can swap the whole module without handling the bare lamp.
How is the RLC-072 lamp installed in the projector?
Power off and cool the projector, open the lamp door, release the retaining screws, pull the old module out, insert the new one until it seats firmly, re-tighten the screws, close the door, then reset the lamp timer in the menu.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



