ViewSonic
ViewSonic PJD7822HDL projector lamp 210W
A 210 W UHP projector lamp rated for 4,000 hours normal or 6,000 hours economy use
- TypeUHP
- Wattage210W
- Lamp Life4,000 (Normal) - 6,000 (Economy) Hrs.
- Ready-to-install module with new Osram UHP 210W bulb
- Up to 6000 hours lamp life in Economy mode
- 4000 hours rated life in Normal mode
- Built to ISO 9001 quality standards
- Compatible with ViewSonic PJD7822HDL projector
Direct replacement lamp module
This ViewSonic PJD7822HDL lamp module ships as a complete housing with a new Osram UHP 210W bulb inside, so it fits straight into the projector without extra assembly. It is intended for owners of the matching ViewSonic projector who need a ready-to-install light source.
OEM-grade build with ISO9001 checks
The unit is produced to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time before it leaves the factory. Because the bulb comes pre-seated in its housing, day-to-day replacement is a single-step swap that requires no alignment tools.
4,000 to 6,000 hour rated life
In normal mode the lamp is rated for 4,000 hours and in economy mode for 6,000 hours, giving a clear interval for planning the next change. Buyers who need longer uninterrupted runtime or a different wattage bulb will not find those options in this module.
Highlights
- Ready-to-install module with new Osram UHP 210W bulb
- Up to 6000 hours lamp life in Economy mode
- 4000 hours rated life in Normal mode
- Built to ISO 9001 quality standards
- Compatible with ViewSonic PJD7822HDL projector
Specifications
| Brand | ViewSonic |
|---|---|
| Type | UHP |
| Wattage | 210W |
| Lamp Life | 4,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
What wattage does the 210W UHP lamp draw, and how does that affect brightness output?
The lamp runs at 210 watts, delivering the rated brightness for the PJD7822HDL without exceeding the projector's power design.
Which housing and connector layout does the RLC-079 module use for the PJD7822HDL chassis?
It ships as a complete bulb-and-housing assembly matched to the PJD7822HDL, so the mounting tabs and plug align with the original lamp cavity.
How is the lamp timer reset after fitting the new module, and what step is often missed?
After installation, open the projector menu, select the lamp-reset option and hold confirm until the counter clears; skipping the reset leaves the old hour count active.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lexmark X748H4MG magenta toner cartridge 10000 pages
- Magenta
- Lexmark X748 Printer



