ViewSonic
ViewSonic PJD7720HD Projector Lamp 210W 4000 hrs
A 210W UHP replacement lamp module rated for 4000 hours, supplied as a complete housing for simple installation
- TypeUHP
- Wattage210W
- Lamp Life4,000 hrs
- OEM replacement module installs instantly
- Philips UHP 210W bulb powers bright images
- 4000-hour rated life extends projector uptime
- Built to ISO 9001 quality standards
- Fits ViewSonic PJD7720HD projectors directly
ViewSonic PJD7720HD Replacement Lamp
This 210W UHP lamp module fits the ViewSonic PJD7720HD projector and arrives as a fully assembled bulb and housing for direct installation. It is intended for owners who need a new lamp to restore brightness and colour accuracy.
UHP Lamp Practical Limits
UHP lamps dim gradually over their rated life and the 4,000-hour figure represents typical use before brightness drops to half. Frequent power cycles shorten actual runtime, and the lamp requires a cool-down period after shutdown to avoid premature failure.
210 Watt Rating Decides Fit
The 210W rating must match the projector's original specification exactly; a different wattage will not ignite correctly or will overheat the optical block. Buyers who need a higher-lumen lamp for larger venues cannot use this module.
Highlights
- OEM replacement module installs instantly
- Philips UHP 210W bulb powers bright images
- 4000-hour rated life extends projector uptime
- Built to ISO 9001 quality standards
- Fits ViewSonic PJD7720HD projectors directly
Specifications
| Brand | ViewSonic |
|---|---|
| Type | UHP |
| Wattage | 210W |
| Lamp Life | 4,000 hrs |
Questions about this item
Which version of the RLC-100 lamp should I choose for my PJD7720HD projector?
Three OEM versions exist: the original bulb manufacturer's module, the same lamp sold under the ViewSonic brand, and an alternative OEM bulb in a housing. A lower-cost compatible version using genuine OEM parts is also offered.
What does the 210W rating mean once the lamp is installed in the projector?
The 210W UHP bulb draws that power to produce the projector's rated brightness; it also determines the heat the cooling system must handle during operation.
Does the lamp housing use a specific connector standard that limits which projectors it fits?
The module is built as a direct RLC-100 replacement for the PJD7720HD, so its connector and housing geometry match that model without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



