We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ViewSonic PJD6223 projector lamp module with 180W Osram UHP bulb in housing

ViewSonic

ViewSonic PJD6223 OEM Replacement Projector Lamp 180W

SKU CH-XM0R-TDMEJ

A new 180W replacement lamp module with housing for ViewSonic projectors, rated for 4,500 to 6,000 hours of use

  • TypeProjector Lamp
  • Wattage180W
  • Lamp Life4,500 (Normal) - 6,000 (Economy) Hrs.
  • Ready to install with pre-assembled housing
  • 180W UHP bulb delivers bright projection
  • Up to 4500 hours in normal mode
  • Extended 6000 hours in economy mode
  • Built to ISO 9001 quality standards

Direct Replacement Lamp Module

The ViewSonic PJD6223 lamp module ships as a fully assembled 180W bulb inside its housing, so it fits straight into compatible ViewSonic projectors without extra parts. It uses a genuine Osram UHP lamp rated for 4,500 hours in normal mode or 6,000 hours in economy mode.

Upgrade From Dim Or Expired Lamps

This module replaces the original RLC-070 lamp when brightness has faded or the projector warns that the lamp has reached its rated life. The jump is worth it when image quality has dropped enough to affect presentations or home viewing and a simple reset will not restore output.

Tool-Free Swap In Minutes

Installation typically requires only opening the lamp door, loosening the captive screws on the old module and sliding the new unit into place until it seats firmly. The most common issue is forgetting to reset the projector lamp timer afterwards, which leaves the replacement warning active even though the new lamp is working.

Highlights

  • Ready to install with pre-assembled housing
  • 180W UHP bulb delivers bright projection
  • Up to 4500 hours in normal mode
  • Extended 6000 hours in economy mode
  • Built to ISO 9001 quality standards

Specifications

BrandViewSonic
TypeProjector Lamp
Wattage180W
Lamp Life4,500 (Normal) - 6,000 (Economy) Hrs.

Questions about this item

Which ViewSonic projector models accept the PJD6223 lamp module?

The PJD6223 lamp module is designed for ViewSonic projectors that use the RLC-070 part number; verify your projector's manual lists RLC-070 before ordering.

What is the correct sequence to install the assembled bulb and housing unit?

Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new PJD6223 module until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu.

When should the lamp be replaced based on the rated hours?

Plan replacement around 4,500 hours in normal mode or 6,000 hours in economy mode; the projector will typically show a warning when the limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.