We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ViewSonic PJD6210-WH projector lamp module with 180W UHP bulb in housing

ViewSonic

ViewSonic PJD6210-WH projector lamp 180W 2000 Hrs

SKU CH-GXMZ-08RJH

Replacement 180 W UHP lamp module rated for 2,000 hours of projector use

  • TypeProjector Lamp
  • Wattage180W
  • Lamp Life2,000 Hrs.
  • 180W UHP lamp delivers bright projection
  • 2,000-hour rated life reduces replacement frequency
  • POA-LMP118 module includes housing for direct installation
  • ISO 9001 manufacturing ensures consistent quality
  • Tested for beam performance, ignition, voltage and run-time

Genuine compatible 180 W replacement lamp

The ViewSonic PJD6210-WH lamp module delivers a new 180 W UHP bulb pre-fitted in its housing for direct installation. It matches the original POA-LMP118 specification and is built to ISO 9001 quality checks for beam performance, ignition, voltage and run-time. Buyers who need a higher-wattage module or a different projector series cannot use this part.

Rated 2 000 hours typical life

At the rated 180 W draw the lamp is specified for 2 000 hours of operation before replacement is due. The assembled housing eliminates alignment steps so the projector returns to service quickly. Installations that demand longer continuous run-times or lower power consumption will not be served by this unit.

Direct swap for POA-LMP118

This module replaces the factory lamp in compatible ViewSonic projectors without adapter cables or firmware updates. The upgrade is worthwhile when the existing lamp has reached its hour limit or shows dimming and ignition faults. Users whose projector requires a different lamp code or form factor must source the correct alternative.

Highlights

  • 180W UHP lamp delivers bright projection
  • 2,000-hour rated life reduces replacement frequency
  • POA-LMP118 module includes housing for direct installation
  • ISO 9001 manufacturing ensures consistent quality
  • Tested for beam performance, ignition, voltage and run-time

Specifications

BrandViewSonic
TypeProjector Lamp
Wattage180W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the POA-LMP118 lamp module in my PJD6210-WH projector?

Power off and unplug the projector, let it cool completely, remove the lamp cover screw, pull out the old module by its handle, insert the new POA-LMP118 until it clicks, replace the cover, then reset the lamp timer in the menu.

What maintenance will the 180W UHP lamp need after installation?

Clean the air filters every few months to maintain airflow; the lamp itself is a sealed 180W UHP module with a 2000-hour rated life and requires no internal servicing before replacement.

What is the first limit I will hit when running the lamp continuously?

The 2000-hour rated lamp life is the primary limit; brightness will gradually decline until the projector indicates replacement is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.