ViewSonic
ViewSonic PJD5351 Projector Lamp 189W 3000 4000 Hrs
A ready-to-install 189W replacement lamp module rated for 3000 to 4000 hours of projector use
- TypeProjector Lamp
- Wattage189W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine Philips P-VIP bulb ensures reliable ignition and colour accuracy
- 189 watt output matches original projector specification for consistent brightness
- 3,000 hours normal mode extends usable life before replacement
- 4,000 hours economy mode reduces power draw and operating cost
- Pre-assembled housing allows tool-free installation in minutes
ViewSonic PJD5351 Replacement Lamp
The ViewSonic PJD5351 is a 189W projector lamp module supplied with a new Philips P-VIP bulb inside a housing. It is manufactured to ISO 9001 standards and rated for 3000 hours in normal mode or 4000 hours in economy mode. The unit arrives fully assembled for direct installation.
Compatibility and Usage Notes
This lamp suits owners of a ViewSonic PJD5351 projector needing a factory-specification replacement. It is not for users whose projector requires a different wattage or connector, nor for those seeking a bare bulb without a housing. The 180-day warranty covers the module as supplied.
Deciding Specification
The critical figure is the 189W Philips P-VIP bulb type; the projector must be designed for this exact wattage and lamp technology. Confirm the projector model accepts the RLC-047 module before ordering. Using a different wattage will prevent correct operation.
Highlights
- Genuine Philips P-VIP bulb ensures reliable ignition and colour accuracy
- 189 watt output matches original projector specification for consistent brightness
- 3,000 hours normal mode extends usable life before replacement
- 4,000 hours economy mode reduces power draw and operating cost
- Pre-assembled housing allows tool-free installation in minutes
Specifications
| Brand | ViewSonic |
|---|---|
| Type | Projector Lamp |
| Wattage | 189W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which ViewSonic projector models accept the RLC-047 lamp module?
The RLC-047 module is built for the PJD5351 projector, so that model will accept it directly.
Can I keep using the same ceiling mount and cables when I swap in this 189 W lamp?
Yes, the lamp ships as a complete housing, so the existing mount, power cord and signal cables stay unchanged.
How do I confirm the new lamp is running correctly after installation?
Reset the projector's lamp-hour counter, then verify the menu shows zero hours and the image reaches full brightness without flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



