We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ViewSonic PJ750-1 projector lamp module with 160W bulb in housing

ViewSonic

ViewSonic PJ750-1 projector lamp 160W 2000 Hrs

SKU CH-3JCH-SWPP6

Replacement projector lamp module with 160W UHB bulb and housing rated for 2000 hours

  • TypeProjector Lamp
  • Wattage160W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with 160 W UHB bulb and housing
  • 2,000-hour rated lamp life for extended use
  • Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Manufactured to ISO 9001 quality standards
  • Compatible with ViewSonic PJ750-1 (DT00331) projectors

Ready-to-install 160 W lamp module

The ViewSonic PJ750-1 is a new replacement projector lamp supplied as a complete 160 W bulb-and-housing assembly. It is designed for owners of compatible ViewSonic projectors who need a direct swap without handling a bare bulb. The module arrives fully assembled for immediate installation. It restores original brightness and colour performance in supported units.

2 000-hour rated life

The UHB lamp is rated for 2 000 hours of typical use before brightness drops to half its initial output. That span covers months of daily classroom or meeting-room sessions with headroom for occasional overtime. Heavy users running the projector continuously will reach the limit sooner and should plan a spare. Eco or low-power modes can extend the interval beyond the base rating.

Direct replacement for failed original lamps

This module replaces a depleted or failed factory lamp in the same projector model, eliminating the dimming, colour shift or shutdown that signals end of life. The jump is worth it when the existing lamp no longer meets minimum brightness or shows ignition faults. It is not suited for projectors that require a different wattage or housing format. Buyers needing higher lumen output or a different form factor should verify compatibility before ordering.

Highlights

  • Ready-to-install module with 160 W UHB bulb and housing
  • 2,000-hour rated lamp life for extended use
  • Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Manufactured to ISO 9001 quality standards
  • Compatible with ViewSonic PJ750-1 (DT00331) projectors

Specifications

BrandViewSonic
TypeProjector Lamp
Wattage160W
Lamp Life2,000 Hrs.

Questions about this item

Will the PJ750-1 lamp module fit the same housing as the original DT00331 lamp in my older ViewSonic projector?

The PJ750-1 is a fully assembled 160W bulb and housing built to the DT00331 specification, so it installs directly into the same projector slot without adapters.

How can I confirm the 160W UHB lamp is igniting and running at the rated 2,000 hours after installation?

Reset the projector's lamp-hour counter after fitting the module; the on-screen timer will then track usage toward the 2,000-hour rating.

Does the box contain only the lamp module or are extra cables or filters included?

The package supplies the complete PJ750-1 lamp module — bulb plus housing — ready to install; no separate cables or filters are bundled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.