We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper ProPress XL tee with three press connections, 3 inch by 2 inch by 3 inch

Viega

Viega ProPress XL tee 20739 3" x 2" x 3

SKU CH-X3F3-KE9W6

Copper press tee connects 3 in, 2 in and 3 in lines at up to 200 psi and 250 °F

  • Press connections install fast without soldering
  • Reducing tee joins 3 in, 2 in and 3 in copper lines
  • Rated for 200 psi working pressure
  • Operates from 0 to 250 degrees F
  • Copper body resists corrosion in potable water systems

Copper press tee for large-diameter piping

The Viega ProPress XL tee 20739 joins 3-inch, 2-inch and 3-inch copper tubes using press connections on all three ports. It is intended for installers who need a permanent, flame-free joint on commercial or residential water systems.

Rated for 200 psi continuous pressure

The fitting maintains its seal at the full 200 psi rating during extended service rather than only in short test bursts. Copper construction resists deformation under sustained load, keeping the joint secure over the system lifetime.

Operates from 0 to 250 degrees Fahrenheit

The press seal remains stable across the stated temperature range without leaking or requiring re-tightening. No external power or heat source is needed once the joint is pressed, so normal operation adds no noise or energy draw.

Highlights

  • Press connections install fast without soldering
  • Reducing tee joins 3 in, 2 in and 3 in copper lines
  • Rated for 200 psi working pressure
  • Operates from 0 to 250 degrees F
  • Copper body resists corrosion in potable water systems

Specifications

BrandVIEGA

Questions about this item

How much heat can the ProPress XL tee handle during continuous hot-water service?

The copper tee is rated for temperatures up to 250 °F, so it will withstand typical residential and light-commercial hot-water loops without softening or losing seal integrity.

What press tool and jaw set are required to install this 3" x 2" x 3" fitting?

You need a ProPress XL-compatible press tool and the matching 3-inch and 2-inch XL jaw sets; standard ProPress jaws will not engage the larger XL profile.

Will this tee connect directly to existing 3-inch copper pipe already in the building?

Yes, each 3-inch end presses onto standard Type K, L or M copper tubing of the same nominal size, so it joins legacy piping without adapters.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.