We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three press-fit ends, 7 5/8 in long

Viega

Viega 20703 ProPress XL reducing tee 3"×3"×2-1/2

SKU CH-Q4XE-C161W

A copper reducing tee with press-fit connections joins three-inch and two-and-a-half-inch tubing for potable water systems up to 200 psi

  • Reducing tee joins 3" and 2-1/2" copper lines
  • Press-fit connections install quickly without soldering or threading
  • EPDM O-ring seals potable water systems up to 200 psi
  • Copper construction resists corrosion in plumbing applications
  • Centre stop dimple ensures correct tube insertion depth

Viega ProPress XL Reducing Tee 3"×3"×2-1/2

This Viega ProPress XL reducing tee joins three copper tubes in a T configuration using press-fit connections. It suits plumbers and mechanical contractors working on potable-water systems who need a secure, flame-free joint. The fitting is made from copper with EPDM O-rings and includes a center stop dimple for consistent insertion depth.

200 psi maximum operating pressure

The fitting is rated for a maximum operating pressure of 200 psi, which determines whether it meets the design pressure of the intended water system. Verify the system pressure against this rating before specifying the part for commercial or residential potable-water installations.

Press-fit installation with center stop dimple

The center stop dimple provides a tactile stop so the installer knows when each tube is fully seated before pressing. A common issue is pressing the joint before the tube bottoms out on the dimple, which can lead to an incomplete seal and leaks during pressure testing.

Highlights

  • Reducing tee joins 3" and 2-1/2" copper lines
  • Press-fit connections install quickly without soldering or threading
  • EPDM O-ring seals potable water systems up to 200 psi
  • Copper construction resists corrosion in plumbing applications
  • Centre stop dimple ensures correct tube insertion depth

Specifications

BrandVIEGA

Questions about this item

How does the 200 psi rating apply once the tee is pressed into a potable water system?

The 200 psi maximum operating pressure is the design limit for the pressed joint in potable water service; the EPDM O-ring and copper body maintain that seal at the rated pressure when installed with the correct press tool and jaw size.

What does the press-fit connection standard mean for tool compatibility on this reducing tee?

All three ends use the Viega ProPress XL press-fit profile, so you need an XL-series press tool with matching 3 in and 2-1/2 in jaws or rings to form each connection.

What clearance is required to fit the 7 5/8 in overall length into a pipe run?

The tee measures 7 5/8 in end-to-end with the center stop dimple; allow at least that much straight run plus room for the press tool to engage each jaw without obstruction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.