We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ProPress ball valve, 3/4" x 3/4" straight body, lever handle

Viega

Viega ProPress ball valve 3/4" x 3/4" 24035 bathware

SKU CH-K615-E46WN

Manual two-way ball valve with brass body, full-port chrome-plated ball and 200 psi water rating

  • TypeOther
  • Full-port design ensures unrestricted water flow
  • Brass and bronze body resists corrosion in plumbing systems
  • 200 psi operating pressure handles typical residential supply
  • Vacuum-rated to 29.2 in Hg for negative-pressure applications
  • Non-locking handle provides simple manual on/off control

Viega ProPress Ball Valve 24035

The Viega ProPress ball valve 24035 is a manual two-way valve constructed from brass and bronze with a three-piece body. It features a full-port design with a chrome-plated brass ball and a straight body style, rated for water service at 200 psi operating pressure and a 29.2 in Hg vacuum rating.

Suitable for residential and commercial water lines

This valve suits installers who need a non-locking handle and full-flow capacity on a 3/4 inch nominal pipe size. It does not meet 3-A sanitary standards and carries no rating for steam or combustible gas, so it is not intended for those media or for applications requiring a locking handle.

Full-port three-piece brass construction

The three-piece brass and bronze body with a chrome-plated brass ball provides full-port flow characteristics for water systems. The 200 psi pressure rating and 29.2 in Hg vacuum capability define the operational limits for this specific valve configuration.

Highlights

  • Full-port design ensures unrestricted water flow
  • Brass and bronze body resists corrosion in plumbing systems
  • 200 psi operating pressure handles typical residential supply
  • Vacuum-rated to 29.2 in Hg for negative-pressure applications
  • Non-locking handle provides simple manual on/off control

Specifications

BrandVIEGA
TypeOther

Questions about this item

How is the Viega ProPress 24035 ball valve installed and what step do people often get wrong?

The valve uses ProPress press connections on each 3/4" end. The step installers miss is fully seating the tubing before pressing and then verifying the press indicator ring on every joint.

What maintenance or replacement will the Viega ProPress 24035 ball valve need later?

The chrome-plated brass ball and brass/bronze body are corrosion-resistant for water service. Periodic operation of the non-locking handle prevents seizing; replace only if leakage appears at the press joints or ball seal.

What limit shows up first on the Viega ProPress 24035 ball valve under sustained use?

The 200 psi maximum operating pressure for water is the primary limit. Exceeding it risks joint failure before the 29.2 in Hg vacuum rating or temperature limits become factors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.