We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper tee fitting with three press-fit ends and rolled center stop

Viega

Viega Propress 3/4 in Copper Tee Press-Fit 200 psi

SKU CH-P822-KRF4C

A copper tee fitting with three press-fit connections for potable water systems, rated to 200 psi and featuring EPDM O-rings and a rolled centre stop

  • Item Count1
  • Press-fit connections eliminate soldering for faster installation
  • Triple press design creates secure joints on all three branches
  • Copper construction resists corrosion in potable water systems
  • EPDM O-ring provides reliable sealing up to 200 psi
  • Rolled center stop ensures proper tube insertion depth

Copper Press-Fit Tee

The Viega Propress 3/4 in copper tee joins three equal-sized copper tubes using press-fit connections on every branch. It is built for potable-water systems where a fast, flame-free joint is preferred over soldering. The rolled centre stop helps align each tube during installation.

200 psi Rating and Three-Way Flow

Rated for a maximum operating pressure of 200 psi, the fitting handles typical residential and light-commercial water pressures with headroom to spare. Each 3/4 in branch accepts the same tube size, so flow splits evenly without a reduction step. The EPDM O-ring seals on contact once pressed, leaving no path for leaks if the tool is calibrated.

Replaces Sweated Copper Tees

This tee replaces traditional sweat fittings where open flame is impractical or prohibited, cutting joint time and eliminating solder consumables. The jump is worth it on remodel work behind finished walls, in tight service chases, or on any job where a press tool is already on site. It does not suit systems that require threaded or flanged connections, nor installations where the tube size differs between branches.

Highlights

  • Press-fit connections eliminate soldering for faster installation
  • Triple press design creates secure joints on all three branches
  • Copper construction resists corrosion in potable water systems
  • EPDM O-ring provides reliable sealing up to 200 psi
  • Rolled center stop ensures proper tube insertion depth

Specifications

Item Count1
BrandViega

Questions about this item

Will the 3/4 in press-fit tee join my existing 3/4 in copper pipe without soldering?

Yes, the fitting uses press-fit connections on all three 3/4 in ends so it joins existing copper pipe mechanically with no soldering required.

How do I verify the pressed joints are leak-free after installation?

Pressurise the system up to 200 psi and inspect each joint; a properly pressed connection will hold pressure with no visible water seepage.

Does the box contain the EPDM O-rings and centre stop, or must I order them separately?

The fitting ships with the EPDM O-rings and rolled centre stop already installed; nothing extra is needed for a standard press connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.