We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three press-fit ends, rolled centre stop, EPDM O-rings

Viega

Viega ProPress 2918 reducing tee 2" x 2" x 3/4

SKU CH-TDJS-8KZM4

Copper reducing tee joins 2" and 3/4" lines with press-fit connections rated to 200 psi

  • Press-fit connection speeds installation without soldering
  • Reducing tee joins 2 in, 2 in and 3/4 in copper lines
  • EPDM O-ring seals potable-water systems up to 200 psi
  • Rolled centre stop ensures consistent insertion depth
  • Copper construction resists corrosion for long service life

ProPress 2918 Reducing Tee

The Viega ProPress 2918 is a copper reducing tee designed for press-fit connections in potable water systems. It joins two 2 inch copper tubes with a 3/4 inch branch using a crimp pressing tool and integrated EPDM O-rings.

Installers Pressing Copper Lines

Plumbers and mechanical contractors who press copper tube to the listed sizes will find this tee compatible with standard press jaws. It does not suit installers working with steel, PEX or other tube materials, nor those requiring threaded, soldered or push-fit joints.

Capacity and Headroom

The fitting handles potable water at pressures up to 200 psi and its rolled centre stop ensures correct tube insertion depth. It will not serve applications that exceed this pressure rating or that demand a different branch size or tube material.

Highlights

  • Press-fit connection speeds installation without soldering
  • Reducing tee joins 2 in, 2 in and 3/4 in copper lines
  • EPDM O-ring seals potable-water systems up to 200 psi
  • Rolled centre stop ensures consistent insertion depth
  • Copper construction resists corrosion for long service life

Specifications

BrandViega

Questions about this item

What copper tubing sizes must I already have to connect all three ports of the 2918 reducing tee?

You need 2 in copper tube for the two straight ports and 3/4 in copper tube for the branch port, all compatible with press-fit connections.

Will the 2918 tee press onto my existing 2 in and 3/4 in copper pipe without changing tools?

Yes, the tee uses the same press-fit connection type on every port, so your current press tool and jaws for those sizes will work.

How do I confirm the 2918 tee is seated and sealed correctly after pressing?

A properly pressed joint shows the rolled center stop fully engaged and the EPDM O-ring compressed evenly around each tube end with no visible gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.