We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper tee fitting with three press-fit ends, rolled center stop, EPDM O-rings, metallic finish

Viega

Viega ProPress 2918 Copper Tee 2 in

SKU CH-7E8A-J0368

Copper tee with press-fit connections on all three 2 in ends, EPDM O-rings and 200 psi rating

  • Item Count1
  • Press-fit copper tee installs without soldering
  • Three 2 in press-fit ends join equal-sized lines
  • EPDM O-ring seals potable water at 200 psi
  • Rolled centre stop sets insertion depth automatically
  • Single-piece copper body rated for 200 psi

Viega ProPress 2918 Copper Tee

The Viega ProPress 2918 is a copper tee fitting designed for potable water systems. It connects three 2 in copper tubes using press-fit connections on all sides. The fitting includes a rolled centre stop and an EPDM O-ring for sealing. It is rated for a maximum operating pressure of 200 psi.

Suited for installers joining equal-sized copper

This tee suits plumbers joining three 2 in copper tubes in a potable water installation. The press-fit ends allow a secure joint without soldering or threading. Builders needing a reducing tee, a different tube size, or a fitting for gas or oil lines should look elsewhere.

Press-tool installation frees up flame work

The press-fit design requires a compatible press tool and jaw set for copper, which must be supplied separately. No open flame, flux or solder is needed, reducing fire risk on site. The rolled centre stop helps position each tube at the correct depth. The 5 29/32 in overall length determines the space the tee occupies in the pipe run.

Highlights

  • Press-fit copper tee installs without soldering
  • Three 2 in press-fit ends join equal-sized lines
  • EPDM O-ring seals potable water at 200 psi
  • Rolled centre stop sets insertion depth automatically
  • Single-piece copper body rated for 200 psi

Specifications

Item Count1
BrandViega

Questions about this item

What copper tubing size do I need to connect to the 2 in press-fit ends?

The tee accepts 2 in copper tube on all three press-fit connections.

Can I press this tee onto existing 2 in copper pipe that is already in the wall?

Yes, the press-fit ends join to 2 in copper tube; clean the tube and use a compatible press tool.

How do I confirm the joint is sealed after pressing?

Pressurise the system up to 200 psi and inspect each connection for leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.