We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper tee fitting with three press-fit ends and rolled center stop

Viega

Viega ProPress 2918 Copper Tee 1 in

SKU CH-1YQG-73RGH

Copper press-fit tee joins three 1 in lines for potable water at 200 psi

  • Item Count1
  • Press-fit copper tee installs fast without soldering
  • 200 psi rating handles high-pressure potable water systems
  • EPDM O-ring seals reliably across temperature ranges
  • Rolled center stop ensures consistent insertion depth
  • 3 3/4 in overall length fits standard plumbing layouts

ProPress 2918 Copper Tee 1 in

The Viega ProPress 2918 is a copper tee fitting designed for potable water systems. It connects three 1 in copper tubes using press-fit connections on all sides. The fitting includes a rolled centre stop and EPDM O-rings for a secure seal.

Installation uses a compatible press tool

Press-fit ends allow quick installation without soldering, flux or open flame. A calibrated press tool and correct jaw size are required to form a permanent joint. Misaligned tube insertion or an incomplete press cycle can cause leaks.

Suits plumbers joining three 1 in copper lines

This tee fits installations needing a single 1 in branch from a 1 in main. It does not suit systems using different tube sizes, threaded connections or press tools not approved for ProPress. Buyers needing reducers, elbows or threaded adapters should select other fittings.

Highlights

  • Press-fit copper tee installs fast without soldering
  • 200 psi rating handles high-pressure potable water systems
  • EPDM O-ring seals reliably across temperature ranges
  • Rolled center stop ensures consistent insertion depth
  • 3 3/4 in overall length fits standard plumbing layouts

Specifications

Item Count1
BrandViega

Questions about this item

How can I confirm the ProPress 2918 tee is working correctly after pressing?

Press each of the three 1 in connections with a compatible ProPress tool, then pressure-test the system up to 200 psi; no leaks at the rolled center stops and EPDM O-rings confirms a sound joint.

What comes with the 2918 copper tee and what must I supply?

The box contains one copper tee with factory-installed EPDM O-rings and rolled center stops; you must provide Type L or K copper tubing, a ProPress press tool and jaws sized for 1 in tube.

Which ProPress tee should I choose for a 1 in potable-water branch?

Select the 2918 model — it is a 1 in copper tee with press-fit ends on all three ports, rated for 200 psi in potable-water systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.