We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper tee fitting with three press-fit ends and rolled center stop

Viega

Viega ProPress 2918 Copper Tee 1-1/2 in

SKU CH-J0YV-BE4FZ

Copper press-fit tee connects three 1-1/2 inch lines for potable water at 200 psi

  • Item Count1
  • Press-fit joints install without flame for faster work
  • EPDM O-ring seal resists hot and cold potable water
  • Copper body rated to 200 psi for reliable pressure holding
  • Single-piece tee joins three 1-1/2 in lines in one fitting
  • Rolled centre stop ensures correct insertion depth every time

ProPress 2918 Copper Tee

This ProPress 2918 copper tee connects three 1-1/2 inch copper tubes using press-fit joints on every branch. It suits installers working on potable water systems who need a permanent, solder-free connection method. The rolled center stop ensures correct insertion depth during assembly. It is not for gas, fuel or compressed-air lines.

Thermals Noise Power

Press fittings create a mechanical seal without open flame, so there is no heat introduced to surrounding materials during installation. The EPDM O-ring maintains its elasticity across normal potable water temperatures and resists chloramine-treated supplies. No electrical power or ongoing energy draw is involved once the joint is pressed.

Upgrade Path

The tee replaces traditional sweat-solder tees of the same copper tube size, eliminating flux, solder and fire-watch requirements on the job site. The jump is worth it when labour savings, fire-safety restrictions or tight access make soldering impractical. It does not adapt to different tube sizes or non-copper piping.

Highlights

  • Press-fit joints install without flame for faster work
  • EPDM O-ring seal resists hot and cold potable water
  • Copper body rated to 200 psi for reliable pressure holding
  • Single-piece tee joins three 1-1/2 in lines in one fitting
  • Rolled centre stop ensures correct insertion depth every time

Specifications

Item Count1
BrandViega

Questions about this item

How do I install the Viega ProPress 2918 tee and which step is often missed?

Cut copper tube square, deburr, mark insertion depth, press with a calibrated ProPress tool; the step often missed is verifying the press indicator ring on all three joints.

What maintenance or replacement will the Viega ProPress 2918 tee need later?

The EPDM O-rings on each press end may require replacement after extended service or if leaks appear during pressure testing.

What limit appears first on the Viega ProPress 2918 tee under sustained use?

The 200 psi maximum operating pressure is the first limit reached during sustained high-pressure service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.