We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three press-fit ends, satin metallic finish

Viega

Viega ProPress 2918 Copper Reducing Tee 1-1/4" x 1" x 3/4

SKU CH-A1T2-DAN9R

A press-fit copper reducing tee joining 1-1/4, 1 and 3/4 inch tubes for potable water up to 200 psi and 250 °F

  • Reducing tee joins three different pipe sizes
  • Press-fit connections install without soldering or threading
  • Copper body with EPDM seals handles 200 psi pressure
  • Rated for 250 °F maximum operating temperature
  • Overall length 3 27/32 in fits tight spaces

Reducing Tee for Potable Water

The Viega ProPress 2918 is a copper reducing tee designed for potable water systems. It connects three copper tubes of different sizes using press-fit connections on all ends. The fitting is supplied new and ready for professional installation.

Three Press-Fit Connections in One Fitting

Side A accepts a 1-1/4 inch copper tube, side B accepts a 1 inch tube, and side C accepts a 3/4 inch tube. All three connections use the press-fit method with EPDM O-rings to create a secure seal. The overall length measures 3 27/32 inches.

Suits Installers Joining Three Different Tube Sizes

This tee suits plumbers who need to branch a potable water line from a 1-1/4 inch main down to 1 inch and 3/4 inch branches in a single joint. It is not for installers who require threaded, soldered, or push-fit connections instead of press-fit. Buyers needing a straight coupling or a tee with uniform port sizes should look at other fittings.

Highlights

  • Reducing tee joins three different pipe sizes
  • Press-fit connections install without soldering or threading
  • Copper body with EPDM seals handles 200 psi pressure
  • Rated for 250 °F maximum operating temperature
  • Overall length 3 27/32 in fits tight spaces

Specifications

BrandViega

Questions about this item

What does the 200 psi rating mean once the tee is installed in a real plumbing system?

The fitting will hold up to 200 psi without leaking when pressed onto copper tube with the correct tool.

What does the press-fit interface cap in practice?

It limits the joint to copper tube sized exactly to the three ends and requires a compatible press tool.

What physical space does the 3 27/32 in overall length need to fit or mount?

You need at least 3 27/32 inches of straight run plus clearance for the press jaws on each connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.