Viega ProPress 2918 Copper Reducing Tee 1-1/4" x 1-1/4" x 3/4

Reducing Tee for Press-Fit Copper

The Viega ProPress 2918 is a copper reducing tee designed for potable water systems. It joins two 1-1/4 inch press-fit connections to a 3/4 inch branch using the ProPress crimp method. The fitting includes a rolled centre stop to control insertion depth on all three ports. Installers use it where a smaller branch line splits from a larger main.

Leak-Free Joints Under 200 psi

Each port uses an EPDM O-ring that seals when pressed with compatible tooling, eliminating open-flame soldering on site. The copper body handles a maximum operating pressure of 200 psi in normal service. No flux, solder or cooling time is required, so the joint is pressure-testable immediately after pressing. The pressed connection remains mechanically secure under thermal cycling.

Centre Stop and EPDM Seals Included

The rolled centre stop is built into the fitting body and ensures each tube reaches the correct depth without separate gauges. EPDM O-rings are factory-fitted for potable water compatibility and resist common disinfectants. No additional sealing compounds, gaskets or software are supplied or needed. The fitting is ready to press straight from the package.