We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper press-fit slip coupling with EPDM O-rings, straight form, no centre stop

Viega

Viega ProPress 2915.3 Copper Slip Coupling 1-1/4

SKU CH-TAFD-AWNTD

Copper press-fit slip coupling joins 1-1/4 in tubing without a centre stop, rated to 200 psi

  • Press-fit copper ends install without soldering or flame
  • EPDM O-ring seal handles 200 psi potable water service
  • Slip design without center stop allows mid-pipe repairs
  • Straight 1-1/4 in coupling fits standard copper tube sizes
  • Viega ProPress system delivers reliable leak-free connections

ProPress 2915.3 Copper Slip Coupling

This copper slip coupling joins two 1-1/4 inch copper tubes using press-fit connections on both ends. It is designed for potable water systems and carries an EPDM O-ring seal. The fitting has no centre stop, allowing it to slide fully over a pipe for repair work. Overall length is 2 7/32 inches.

Press-Fit System Limits

The coupling is rated for a maximum operating pressure of 200 psi in potable water applications. It requires a compatible press tool and jaw set to form a permanent, leak-free joint; soldering, threading or compression methods cannot be used with this fitting. Copper tube must meet the correct diameter and wall-thickness tolerances for the press profile to seal properly.

Installation And Common Issues

A calibrated press tool is essential; an incorrect jaw size or incomplete press cycle will leave an unsealed joint. Because the coupling lacks a centre stop, the installer must mark the insertion depth on each tube to ensure equal engagement. Debris or scratches on the tube surface can damage the EPDM O-ring during insertion.

Highlights

  • Press-fit copper ends install without soldering or flame
  • EPDM O-ring seal handles 200 psi potable water service
  • Slip design without center stop allows mid-pipe repairs
  • Straight 1-1/4 in coupling fits standard copper tube sizes
  • Viega ProPress system delivers reliable leak-free connections

Specifications

BrandViega

Questions about this item

What size Viega ProPress slip coupling do I need for 1-1/4 inch copper tubing?

The 2915.3 model is sized for 1-1/4 inch copper tube on both press-fit ends, giving a straight 2 7/32 inch overall length without an internal stop.

What does the 200 psi rating mean when the coupling is installed?

It indicates the maximum operating pressure the EPDM-sealed copper joint is designed to hold in a potable water system once pressed.

Which press-tool standard does the 2915.3 coupling use?

It connects via Viega ProPress press-fit on both ends, compatible with the corresponding ProPress jaw sets for copper.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.