We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer fitting, straight shape, 1 by 2 inch press-fit ends, EPDM O-ring visible

Viega

Viega ProPress 2915.1 copper reducer 1 in x 2 in

SKU CH-WKFX-FX9E7

Copper straight reducing adapter joins 2 in and 1 in tubes with press-fit and FTG ends, rated to 200 psi and 250 °F

  • Reduces 2 in to 1 in copper tubing
  • Press-fit connection installs without soldering or flame
  • EPDM O-ring seals potable water systems
  • Rated 200 psi and 250 °F operating limits
  • Meets ASTM B75 and ASTM B88 standards

Copper reducer for potable water systems

The Viega ProPress 2915.1 copper reducer joins a 2 in copper tube to a 1 in press-fit connection in straight runs. It is built for potable water installations that require a secure, flame-free joint. The EPDM O-ring provides the seal at the press end.

Capacity and headroom for pressure and temperature

Rated to 200 psi maximum operating pressure and 250 degrees F maximum operating temperature, it handles typical residential and commercial hot and cold water demands. Systems that exceed either limit will need a different fitting class.

Connection types decide fit

Side A is a 2 in FTG connection while Side B is a 1 in press-fit connection. If both ends of your pipe run require press-fit or both require FTG, this reducer will not match the joint style.

Highlights

  • Reduces 2 in to 1 in copper tubing
  • Press-fit connection installs without soldering or flame
  • EPDM O-ring seals potable water systems
  • Rated 200 psi and 250 °F operating limits
  • Meets ASTM B75 and ASTM B88 standards

Specifications

BrandViega

Questions about this item

Will the 2 in FTG end of the Viega ProPress 2915.1 reducer fit into my existing 2 in copper press fittings?

Yes, the FTG end is sized for 2 in copper tube and presses directly into standard 2 in press-fit sockets without extra adapters.

How can I verify the EPDM O-ring seal is holding at the 200 psi rating after I press the joint?

Pressurise the line to the system test pressure, then inspect the press indicator ring and check for any water weeping at the 1 in and 2 in connections.

Does the Viega ProPress 2915.1 box contain the press jaws or only the copper reducer with its EPDM O-ring?

The package includes the straight reducing adapter with the factory-fitted EPDM O-ring; press jaws and the pressing tool are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.