We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze press-fit adapter with male NPT thread, straight body, EPDM O-ring visible

Viega

Viega ProPress 2911ZL Bronze Adapter 1-1/2 in

SKU CH-4FME-0YP4J

Bronze press-fit adapter joins 1-1/2 in copper tube to 1-1/2 in MNPT for potable water systems rated to 200 psi and 250 °F

  • Press-fit connection eliminates open-flame soldering for safer installs
  • Bronze body resists corrosion in potable water systems
  • EPDM O-ring seals reliably up to 250 degrees F
  • Rated for 200 psi working pressure in residential plumbing
  • Meets ASTM B75 and B88 standards for quality assurance

Bronze Press-Fit Adapter

The Viega ProPress 2911ZL is a straight bronze adapter that joins 1-1/2 in copper tubing to a 1-1/2 in male NPT thread. It is designed for potable water systems and installs with a standard press tool instead of solder or thread sealant.

Capacity and Headroom

The fitting handles a maximum operating pressure of 200 psi and a maximum operating temperature of 250 Degrees F. The EPDM O-ring seals the press connection, while the bronze body resists corrosion in water service. The adapter runs out of headroom when system pressure or temperature exceeds those rated limits.

Critical Specification

The defining detail is the press-fit connection on the copper side paired with a 1-1/2 in MNPT thread on the other. If the installation calls for a soldered joint, a threaded female end, or a different tube size, this adapter will not fit the piping scheme.

Highlights

  • Press-fit connection eliminates open-flame soldering for safer installs
  • Bronze body resists corrosion in potable water systems
  • EPDM O-ring seals reliably up to 250 degrees F
  • Rated for 200 psi working pressure in residential plumbing
  • Meets ASTM B75 and B88 standards for quality assurance

Specifications

BrandViega

Questions about this item

Will the 1-1/2 in press-fit end join my existing 1-1/2 in copper tube?

Yes, the press-fit end is sized for 1-1/2 in copper tube and the EPDM O-ring seals when pressed with a standard ProPress jaw.

How can I confirm the joint is leak-free after pressing?

Pressurise the system up to 200 psi at no more than 250 °F; a sound joint shows no pressure drop and no moisture at the adapter.

Does the 2911ZL box include press jaws or pipe dope?

The box contains only the bronze straight adapter with its factory-fitted EPDM O-ring; press jaws and thread sealant are purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.